Audi A8 2019 Service Training page 38

Mechatronic module
The mechatronic module of the 0D5 transmission in the
Audi A8 has the factory designation E 26/29 at ZF-Getriebe
GmbH.
Power supply for Transmis-
sion Fluid Auxiliary Hydraulic
Pump 1
V475
MTF drain plug for
transfer case
MTF filler and
inspection plug for
transfer case
Connector
Transmission Fluid Auxiliary
Hydraulic Pump 1
V475
Connector
(V475)
ATF drain plug
Note
When performing repairs, always protect the mechatronic module against electrostatic discharge.
34
Connection to
Transmission Fluid Auxiliary
Hydraulic Pump 1
V475
ATF filler and
inspection plug
Auxiliary hydraulic pump intake port
The sensors, actuators and design configuration of the elec-
trohydraulic parking lock of the 0D5 transmission are identical
to those of the mechatronic module of the 0BK transmission.
Oil bleed port for double shaft oil seal,
transfer case/front axle drive
Filler and inspection plug for
front axle drive
ATF filter
Drain plug,
front axle drive
Electrical connector
housing for connection
to vehicle
Mechatronic module
Connection
to vehicle
Plastic ATF pan
662_226