1. Manuals
  2. Brands
  3. DuraTech Industries Manuals
  4. Farm Equipment
  5. HAYBUSTER CMF-980
  6. Operating instructions and parts reference

DuraTech Industries HAYBUSTER CMF-980 Operating Instructions And Parts Reference

Vertical mixer
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Operating Instructions and Parts Reference
CMF-980
V E R T I C A L M I X E R
0500155 • S
2017
eptember
O
i
riginal
nStructiOnS
TM
D
T
I
ura
ech
nDusTrIes
Po B
1940, J
ox
amesTown
T
: (701) 252-4601• F
el
.
www
DuraTechInDusTrIes
P
I
roduct
nformatIon
I
I
.
nTernaTIonal
nc
, nD 58402-1940
: (701) 252-0502
ax
.
•
.
.
neT
www
hayBusTer
com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HAYBUSTER CMF-980 and is the answer not in the manual?

Questions and answers

Related Manuals for DuraTech Industries HAYBUSTER CMF-980

Summary of Contents for DuraTech Industries HAYBUSTER CMF-980

  • Page 1 Operating Instructions and Parts Reference CMF-980 V E R T I C A L M I X E R roduct nformatIon nDusTrIes nTernaTIonal Po B 1940, J , nD 58402-1940 amesTown : (701) 252-4601• F : (701) 252-0502 • 0500155 • S 2017 DuraTechInDusTrIes hayBusTer...
  • Page 2 A Tradition of Innovation Since 1966...
  • Page 3 This manual, as well as materials provided by component suppliers to DuraTech Industries are all considered to be part of the information package. Every operator is required to read and understand these manuals, and they should be located within easy access for periodic review.
  • Page 4 A Tradition of Innovation Since 1966...
  • Page 5 This vertical mixer is not to be used for any purpose other than for which it is intended as explained in the operator’s manual, advertising material and other pertinent written material prepared by DuraTech Industries. Any machine subject to misuse may cause personal injury or death, and void manufactures warranty.
  • Page 6 F O R E W O R D Purpose The purpose of this owner’s manual is to explain maintenance requirements and routine adjustments for the most efficient operation of your CMF-980. There is also a trouble shooting section that may help in case of problems in the field. Any information not covered in this manual may be obtained from your dealer.
  • Page 7 F O R E W O R D Dealer responsibilities • Read Section 2, “Dealer Preparation,” and perform the tasks outlined. Also perform a pre-operation inspection as described in Section 3. • Upon delivery of the unit to the customer, it is your responsibility to conduct a training session on the safe operation of the unit for primary operator(s).

  • Page 8: Table Of Contents

    T A B L E O F C O N T E N T S Part I: Operating instructions ..........1 Section 1: Safety ................. 2 1.1 Safety-alert symbols ..................2 1.2 Operator - personal equipment ................4 1.3 Machine safety labels ..................5 1.4 Shielding ......................
  • Page 9 T A B L E O F C O N T E N T S Section 4: Lubrication ............... 26 4.1 Lubrication..................... 26 4.2 General appearance ..................31 Section 5: Troubleshooting ............32 Section 6: Options..............33 6.1 Rear bay door....................33 6.2 Magnetic extension spouts................
  • Page 10 T A B L E O F C O N T E N T S Part II : Parts Reference ..........39 TUB ASSEMBLY COMPLETE ................40 TUB ASSEMBLY DETAILS A AND B ..............41 TUB ASSEMBLY DETAIL C ................42 MAINFRAME ASSEMBLY ..................
  • Page 11 T A B L E O F C O N T E N T S SINGLE DISCHARGE CONVEYOR HYDRAULICS ........86 SINGLE DISCHARGE CONVEYOR HYDRAULICS - DETAIL A ....87 SINGLE DISCHARGE CONVEYOR HYDRAULICS - DETAIL B ....88 SINGLE DISCHARGE CONVEYOR HYDRAULICS - DETAILS C AND D ... 89 SINGLE DISCHARGE CONVEYOR HYDRAULICS - DETAILS E AND F ..
  • Page 12 T A B L E O F C O N T E N T S A Tradition of Innovation Since 1966 C M F - 9 8 0 T A B L E O F C O N T E N T S viii...

  • Page 13: Part I: Operating Instructions

    CMF-980 VERTICAL MIXER PART 1: Operating Instructions C M F - 9 8 0 O P E R A T I N G I N S T R U C T I O N S...

  • Page 14: Section 1: Safety

    Section 1: Safety The safety of the operator is of great importance to DuraTech Industries. We have provided decals, shield and other safety features to aid you in using your machine safely. In addition, we ask you to be a careful operator who will properly use and service your Haybuster equipment.
  • Page 15 DANGER: Indicates an imminently hazardous situation that, if not avoided, will result in death or serious injury. This signal word is to be limited to the most extreme situations, typically for machine components that, for functional purposes, cannot be guarded. WARNING: Indicates a potentially hazardous situation that, if not avoided, could result in death or serious injury, and includes hazards...

  • Page 16: Operator - Personal Equipment

    1.2 Operator - personal equipment THE OPERATOR Physical Condition You must be in good physical condition and mental health and not under the influence of any substance (drugs, alcohol) which might impair vision, dexterity or judgment. Do not operate a CMF-980 VERTICAL MIXER when you are fatigued. Be alert ‑ If you get tired while operating your CMF-980 VERTICAL MIXER, take a break.

  • Page 17: Machine Safety Labels

    Machine safety labels The safety decals located on your machine contain important information that will help you operate your equipment. Become familiar with the decals and their locations. DANGER: ROTATING DRIVELINE, KEEP AWAY! ENTANGLEMENT CAN CAUSE SERIOUS INJURIES OR DEATH. DO NOT OPERATE WITHOUT •...
  • Page 18 WARNING: PINCH POINT STAY BACK 6500339 WARNING: FOR YOUR PROTECTION AND SAFETY OF OTHERS, FOLLOW THESE SAFETY RULES. Read and understand operators manual before operating machine. Place all controls in neutral, stop engine, remove ignition key, lock out power source, and wait for all motion to stop before servicing, 6500208 adjusting, repairing, or unplugging.
  • Page 19 WARNING: Risk of eye injury Eye Protection required 6500487 WARNING: Moving parts can crush and cut. Keep hands clear. 6500488 WARNING: Noise hazzard. Ear protection required. 6500489 WARNING: NO STEP DO NOT STEP, STAND, OR SIT ON THIS SURFACE. MAY CAUSE INJURY AND/OR EQUIPMENT DAMAGE. 6500490 CAUTION: ADJUST TRACTOR DRAWBAR SO THAT THE DISTANCE FROM THE END OF THE PTO...

  • Page 20: Shielding

    1.4 Shielding Shields are installed for your protection. Keep them in place, and replace damaged shields. figure 1.1 PTO driveline shield shield CAUTION! NO STEP! DO NOT STEP OR STAND AT THIS LOCATION figure 1.2 Orbit motor auger drive shield shield 1.5 Safety review section BEFORE OPERATING...
  • Page 21 Allow only responsible, properly instructed individuals to operate your machine. Provide proper training • and carefully supervise inexperienced operators. Use a tractor which meets the tractor requirement contained within this manual. Additional weights may • be necessary. Make sure all bystanders and other workers are clear before starting the tractor and CMF‑980. •...
  • Page 22 If equipment has been altered in any way from its original design, DuraTech Industries does not accept any liability for injury or warranty.

  • Page 23: Towing/Road Transport

    1.6 Towing/road transport Use good judgment and drive slowly over rough or uneven terrain. • Avoid loose fill, rocks and holes; they can be dangerous for equipment operation or movement. Allow for • unit length when making turns. Be sure tractor brakes are properly adjusted and foot pedals are locked together. •...

  • Page 24: Section 2: Dealer Preparation

    Section 2: Dealer Preparation 2.1 Pre-delivery inspection Instructions: Before delivering the machine, check the following items carefully and make corrections when necessary. Place an “X” in the box after each item has been checked and found to be acceptable. Check machine for missing items or damage in transit. Check for loose bolts.

  • Page 25: Section 3: Operation

    Section 3: Operation To insure long life and economical operation, we highly recommend the operator of the CMF‑980 be thoroughly instructed in the maintenance and operation of the machine. There is no substitute for a sound preventative maintenance program and well trained operator. Prior to starting the engine of the tractor, we recommend the operator make a visual inspection of the unit.

  • Page 26: Pre-Starting Inspection Instructions

    3.1 Pre-starting inspection instructions WARNING: Before inspecting the machine, use the normal shut‑down procedure in Section 3.11. Check the following: Hydraulic components for leaks or damage. Warning: Hydraulic fluid escaping under pressure can be almost invisible and can have sufficient force to penetrate the skin.

  • Page 27: Setup And Adjustments

    3.2 Setup and Adjustments 3.2.1 Hitch Adjustments The hitch is adjustable so that the machine is parallel to the ground when attached to the tractor drawbar. This is accomplished by removing the two mounting bolts and reinstalling them with the hitch at the proper height. The distance from the end of the P.T.O.

  • Page 28: Shield

    When hooking up the machine, install a proper hitch pin and secure it with a hairpin clip or comparable device, crank the jack until the foot of the jack is fully raised. Remove the jack pin and relocate the jack to the storage location. Reinstall the jack pin.

  • Page 29: Tires And Rims

    3.2.5 Tires and Rims Tires should be inflated to 135 PSI (9 bars) maximum, and should be free of cuts or cracks. Verify tire markings before inflating. There should also be adequate tread and no visible cords, wires or tread separation. Tires must also be of proper load rating, speed rating and size.

  • Page 30: Free Motion Automatic Clutch

    3.2.8 Free motion automatic clutch Torque protection is built into the PTO driveline with two free motion automatic clutches. These clutches are located on each driveline immediately before each gearbox. When overload occurs the clutch disengages and does not reengage until the driveline speed is reduced to near zero. The clutch makes a loud click when it disengages.

  • Page 31: Two-Speed Gearbox

    3.2.11 Two-Speed Gearbox The two‑speed gearbox is available on the CMF‑980 for operators who want more control of their mixing speeds, want to reduce overall horsepower requirements, or prefer to turn off mixer while transporting a loaded mixer. The two‑speed gearbox has two speeds, low and high. figure 3.6 Two speed gearbox in low speed position...

  • Page 32: Setting Chain Tensions On Conveyors

    3.2.12 Setting Chain Tensions on Conveyors Dogleg Conveyor Set tension while conveyor is running. Turn tensioning nut to compress the spring into the cup until either the nut reaches the cup or the spring is fully compressed. Do not tension beyond full compression of the spring. Tension other side, and then recheck the first one adjusted.

  • Page 33: Hitching The Cmf-980

    3.3 Hitching the CMF-980 Warning: Do not operate the CMF‑980 unless the tractor complies with the following requirements: Tractor has a minimum of 150 horsepower. (without two‑speed option) • Tractor has rollover protective structure and seatbelts. • Tractor’s hydraulic system has at least (2) two‑way valves, and a minimum •...

  • Page 34: Unhitching The Cmf-980

    This machine is set up to operate on 1000 rpm only! If required, install the safety chain. Check local regulations regarding safety chain requirements. Refer to figure 3.11 figure 3.11 Safety chain installation Connect the two hydraulic hoses from the hydraulic door cylinder to one set of hydraulic couplers on the tractor.

  • Page 35: Operation Precautions And Instructions

    3.5 Operation precautions and instructions Make sure there are no bystanders in the way. • Before loading, run the mixer empty and check all operations. • Do not overload the mixer. Maximum load is 30,900 lbs. (14,016 kg) Maximum load is determined by •...

  • Page 36: Unloading

    3.8 Unloading To unload the CMF‑980, perform the following steps: If possible, move the mixer to the unloading site while finishing the mixing stage to avoid the need for loaded PTO start‑up. Align CMF with bunk and lower the conveyor extension to desired angle (if equipped). Engage the chain conveyor;...

  • Page 37: Removing The Cmf-980 From Storage

    3.10 Removing the CMF-980 from storage To remove the CMF‑980 from storage, perform the following steps: Remove all protective coverings. Remove blockings from under the CMF‑980. Check tire pressure. Lubricate machine in accordance with lubrication instructions found in this manual. Check the conveyor chain tension.

  • Page 38: Section 4: Lubrication

    Section 4: Lubrication The operator should make a check of all grease fittings on the unit before beginning to operate it so as to become familiar with their location and correct service schedule. Warning: Use normal shut‑down procedure (Section 3.11) before lubricating the machine. Lubrication Use only a high quality, #2 multi‑purpose grease when lubricating the unit.
  • Page 39 figure 4.1 P.T.O. Universal joint (1 of 8) P.T.O. universal joint lubrication zerk figure 4.2 P.T.O. Universal joint (2, 3, & 4 of 8) P.T.O. universal joint lubrication zerks figure 4.3 P.T.O. Universal joint (5 of 8), and P.T.O stand bearing (1 of 1) P.T.O.
  • Page 40 figure 4.4 P.T.O. Universal joint (6 of 8), and automatic clutch automatic clutch P.T.O. universal joint lubrication zerk figure 4.5 P.T.O. Universal joint (7 of 8) P.T.O. universal joint lubrication zerk figure 4.6 P.T.O. Universal joint (8 of 8), and automatic clutch automatic clutch P.T.O.
  • Page 41 figure 4.7 Conveyor bearings lubrication point (1 of 2) conveyor bearings lubrication zerk figure 4.8 Extention conveyor bearings lubrication point (1 of 4) extention conveyor bearings lubrication zerk figure 4.9 Telescoping P.T.O. shaft telescoping shaft figure 4.10 Auger grease lines auger grease lines lubrication zerks C M F - 9 8 0...
  • Page 42 Lubrication cont. Wheel bearings: repack annually Gearbox: Grease 20‑30 pumps every 250 hours (each gearbox), located on the bottom of the tub in front of the left tires. Chains: Oil conveyor chains every 15 hours. When to change oil in gearboxes: After the first 50‑100 hours of operation, drain initial oil, preferably when box is warm.

  • Page 43: General Appearance

    chart 4.1 lubrication chart for reduction gears 4.2 General appearance Clean all mud, dirt, grease and other foreign material from the exterior of the machine. Wash the entire machine. Repaint places where bare metal is exposed. C M F - 9 8 0 O P E R A T I N G I N S T R U C T I O N S...

  • Page 44: Section 5: Troubleshooting

    Section 5: Troubleshooting chart 5.1 Troubleshooting chart C M F - 9 8 0 O P E R A T I N G I N S T R U C T I O N S...

  • Page 45: Section 6: Options

    Section 6: Options Rear bay door figure 6.1 Optional rear door rear door Magnetic extension spouts figure 6.2 Magnetic extension spout extension spout magnets Non-magnetic extension spout figure 6.3 Non-magnetic extension spout angle adjustment bolt extension spout C M F - 9 8 0 O P E R A T I N G I N S T R U C T I O N S...

  • Page 46: Dogleg Conveyor

    Dogleg Conveyor C M F - 9 8 0 O P E R A T I N G I N S T R U C T I O N S...

  • Page 47: Section 7: Maintenance

    Section 7: Maintenance Welding Procedure CMF‑980 welding procedures for machines with a weight scale Precautions are required for welding on machines with electronic components. Electronic components including but not limited to: electronic scales. Proper welding procedures are necessary with in order to avoid damage to the components, their sensors, and associated components.

  • Page 48: Appendix A: Warranty

    This warranty is limited to the replacement if any defective part or parts if DuraTech Industries is notified within thirty (30) days of failure.

  • Page 49: Appendix B: Cmf-980 Specifications

    Appendix B: CMF-980 Specifications General specifications Max. Weight ..............19,100 LBS (6,663.61 kg) Overall length, including trailer ............25’ ‑ 7” (7.79 m) Overall width ................... 10’ ‑ 6” (3.20 m) Tractor P.T.O speed …(1‑3/8” 21 spline) ............1000 Minimum horsepower required ................150 Mixing capacity, w/12”...

  • Page 50: Sound Pressure Level And Sound Power Level Information

    C M F - 9 8 0 O P E R A T I N G I N S T R U C T I O N S...

  • Page 51: Part Ii : Parts Reference

    CMF-980 VERTICAL MIXER Part 2: Parts Reference...

  • Page 52: Tub Assembly Complete

    T U B A S S E M B L Y C O M P L E T E C M F - 9 8 0 P A R T S R E F E R E N C E...

  • Page 53: Tub Assembly Details A And B

    T U B A S S E M B L Y D E T A I L S A A N D B C M F - 9 8 0 P A R T S R E F E R E N C E...

  • Page 54: Tub Assembly Detail C

    T U B A S S E M B L Y D E T A I L C C M F - 9 8 0 P A R T S R E F E R E N C E...
  • Page 55 T U B A S S E M B L Y P A R T S L I S T ITEM PART QTY. PART DESCRIPTION 3100226 GRBX\PLANETARY\DBL\2100 3600694 PTO\44E\14KCLUTCH 4100030 PIN 1” X 3-1/2” HYD. CYL. 4100247 CYL\HYD\2”X30”\1-1/8_ROD 4704181 PIN\LOCK\3/4X2-1/2 4704315 AUGER\ASSY 4704340...

  • Page 56: Mainframe Assembly

    M A I N F R A M E A S S E M B L Y C M F - 9 8 0 P A R T S R E F E R E N C E...
  • Page 57 M A I N F R A M E A S S E M B L Y ITEM PART QTY. PART DESCRIPTION 1100255 CHAIN\SAFETY\AG\1/2”\40K_CAP 2600056 TIRE\385/65R22.5\20PLY 2600653 WHL\10-BOLT\22.5X12.25 2600875 WHL\ASSY\385/65R22.5 (INCLUDES #2 & #3) 3100225 GRBX\2SPD\1.84:1\B&P6078 3600693 PTO\44E\24KCLTCH 3600783 PTO\255-25003\44E\1-3/4 WWCV 4700776 CLMP\HOSE\3/8 4700777...

  • Page 58: Mainframe Assembly Details A And B

    M A I N F R A M E A S S E M B L Y D E T A I L S A A N D B C M F - 9 8 0 P A R T S R E F E R E N C E...
  • Page 59 M A I N F R A M E A S S E M B L Y D E T A I L S A A N D B ITEM PART QTY. PART DESCRIPTION 1100255 CHAIN\SAFETY\AG\1/2”\40K_CAP 2600056 TIRE\385/65R22.5\20PLY 2600653 WHL\10-BOLT\22.5X12.25 2600875 WHL\ASSY\385/65R22.5 (INCLUDES #2 &...

  • Page 60: Auger Assembly

    A U G E R A S S E M B L Y C M F - 9 8 0 P A R T S R E F E R E N C E...
  • Page 61 A U G E R A S S E M B L Y ITEM PART QTY. PART DESCRIPTION 4704313 AUGER\WELD\CMF700 4704365 PL\BACK\BLADE 4704884 COVER\AUGER 4800098 BOLT\HEX\3/8X1-1/4\NC 4800244 SCR\BUT\ALN\3/8X1\NC 4800659 SCR\BUT\ALN\5/8X2\NC 4800948 BOLT\HEX\M16XM60 4900076 NUT\FLG\SERR\3/8\NC 4900110 NUT\FLG\SERR\5/8\NC 5000019 WASH\LOCK\3/8 5000114 WASH\FLAT\5/8\EXTRTHK\GR8 5900061 AUGER\CMF700/830\LINER\TOP 5900062...

  • Page 62: Left Hand Discharge Conveyor Assembly

    L E F T H A N D D I S C H A R G E C O N V E Y O R A S S E M B L Y C M F - 9 8 0 P A R T S R E F E R E N C E...
  • Page 63 L E F T H A N D D I S C H A R G E C O N V E Y O R A S S E M B L Y ITEM PART QTY. PART DESCRIPTION 1000055 SPKT\50\B\12\1\1/4KW 1100099 CHAIN\50DBL\CL 1100150...

  • Page 64: Complete Left Hand Discharge Conveyor Assembly

    C O M P L E T E L E F T H A N D D I S C H A R G E C O N V E Y O R A S S E M B L Y C M F - 9 8 0 P A R T S R E F E R E N C E...
  • Page 65 C O M P L E T E L E F T H A N D D I S C H A R G E C O N V E Y O R A S S E M B L Y ITEM PART QTY.

  • Page 66: Right Hand Discharge Conveyor Assembly

    R I G H T H A N D D I S C H A R G E C O N V E Y O R A S S E M B L Y C M F - 9 8 0 P A R T S R E F E R E N C E...
  • Page 67 R I G H T H A N D D I S C H A R G E C O N V E Y O R A S S E M B L Y ITEM PART QTY. PART DESCRIPTION 1000055 SPKT\50\B\12\1\1/4KW 1100099 CHAIN\50DBL\CL...

  • Page 68: Complete Right Hand Discharge Conveyor Assembly

    C O M P L E T E R I G H T H A N D D I S C H A R G E C O N V E Y O R A S S E M B L Y C M F - 9 8 0 P A R T S R E F E R E N C E...
  • Page 69 C O M P L E T E R I G H T H A N D D I S C H A R G E C O N V E Y O R A S S E M B L Y ITEM PART QTY.

  • Page 70: Dual Discharge Conveyor Assembly (Option)

    D U A L D I S C H A R G E C O N V E Y O R A S S E M B L Y ( O P T I O N ) C M F - 9 8 0 P A R T S R E F E R E N C E...
  • Page 71 D U A L D I S C H A R G E C O N V E Y O R A S S E M B L Y ( O P T I O N ) ITEM PART QTY. PART DESCRIPTION 4100030 PIN 1”...

  • Page 72: Main Conveyor Assembly-4704973 - Sub Assembly 1 (Use W/ Dual & Rh Discharge)

    M A I N C O N V E Y O R A S S E M B L Y - 4 7 0 4 9 7 3 - S U B A S S E M B L Y 1 ( U S E W / D U A L &...

  • Page 73: (Use W/ Dual & Rh Discharge)

    M A I N C O N V E Y O R A S S E M B L Y - 4 7 0 4 9 7 3 - S U B A S S E M B L Y 2 ( U S E W / D U A L &...

  • Page 74: Main Conveyor Assembly-4704973 - Detail A (Use W/ Dual & Rh Discharge)

    M A I N C O N V E Y O R A S S E M B L Y - 4 7 0 4 9 7 3 - D E T A I L A ( U S E W / D U A L & R H D I S C H A R G E ) C M F - 9 8 0 P A R T S R E F E R E N C E...
  • Page 75 M A I N C O N V E Y O R A S S E M B L Y - 4 7 0 4 9 7 3 - P A R T S L I S T ( U S E W / D U A L & R H D I S C H A R G E ) ITEM PART QTY.

  • Page 76: Main Conveyor Assembly-4704972 - Sub Assembly 1 (Use W/Lh Discharge)

    M A I N C O N V E Y O R A S S E M B L Y - 4 7 0 4 9 7 2 - S U B A S S E M B L Y 1 ( U S E W / L H D I S C H A R G E ) C M F - 9 8 0 P A R T S R E F E R E N C E...

  • Page 77: (Use W/Lh Discharge)

    M A I N C O N V E Y O R A S S E M B L Y - 4 7 0 4 9 7 2 - S U B A S S E M B L Y 2 ( U S E W / L H D I S C H A R G E ) C M F - 9 8 0 P A R T S R E F E R E N C E...

  • Page 78: Main Conveyor Assembly-4704972 - Detail A (Use W/Lh Discharge)

    M A I N C O N V E Y O R A S S E M B L Y - 4 7 0 4 9 7 2 - D E T A I L A ( U S E W / L H D I S C H A R G E ) C M F - 9 8 0 P A R T S R E F E R E N C E...
  • Page 79 M A I N C O N V E Y O R A S S E M B L Y - 4 7 0 4 9 7 2 - P A R T S L I S T ( U S E W / L H D I S C H A R G E ) ITEM PART QTY.

  • Page 80: Optional-Lh Dogleg Discharge Conveyor

    O P T I O N A L - L H D O G L E G D I S C H A R G E C O N V E Y O R C M F - 9 8 0 P A R T S R E F E R E N C E...
  • Page 81 O P T I O N A L - L H D O G L E G D I S C H A R G E C O N V E Y O R P A R T S L I S T ITEM PART QTY.

  • Page 82: Optional-Lh Dogleg Discharge Conveyor Details A & B

    O P T I O N A L - L H D O G L E G D I S C H A R G E C O N V E Y O R D E T A I L S A & B C M F - 9 8 0 P A R T S R E F E R E N C E...
  • Page 83 O P T I O N A L - L H D O G L E G D I S C H A R G E C O N V E Y O R D E T A I L S A & B P A R T S L I S T ITEM PART QTY.

  • Page 84: Optional-Lh Dogleg Discharge Conveyor Complete

    O P T I O N A L - L H D O G L E G D I S C H A R G E C O N V E Y O R C O M P L E T E C M F - 9 8 0 P A R T S R E F E R E N C E...
  • Page 85 O P T I O N A L - L H D O G L E G D I S C H A R G E C O N V E Y O R C O M P L E T E ITEM PART QTY.

  • Page 86: Optional-Rh Dogleg Discharge Conveyor

    O P T I O N A L - R H D O G L E G D I S C H A R G E C O N V E Y O R C M F - 9 8 0 P A R T S R E F E R E N C E...
  • Page 87 O P T I O N A L - R H D O G L E G D I S C H A R G E C O N V E Y O R P A R T S L I S T ITEM PART QTY.

  • Page 88: Optional-Rh Dogleg Discharge Conveyor Detail A

    O P T I O N A L - R H D O G L E G D I S C H A R G E C O N V E Y O R D E T A I L A C M F - 9 8 0 P A R T S R E F E R E N C E...
  • Page 89 O P T I O N A L - R H D O G L E G D I S C H A R G E C O N V E Y O R D E T A I L A P A R T S L I S T ITEM PART...

  • Page 90: Optional-Rh Dogleg Discharge Conveyor Complete

    O P T I O N A L - R H D O G L E G D I S C H A R G E C O N V E Y O R C O M P L E T E C M F - 9 8 0 P A R T S R E F E R E N C E...
  • Page 91 O P T I O N A L - R H D O G L E G D I S C H A R G E C O N V E Y O R C O M P L E T E ITEM PART QTY.

  • Page 92: Magnetic Conveyor Chute Assembly

    M A G N E T I C C O N V E Y O R C H U T E A S S E M B L Y ITEM PART NO. QTY. DESCRIPTION 4704357 CHUTE\MAG\CNVYR\WELD 4800153 BOLT\CRG\5/16X3/4\NC 4900108 NUT\FLG\SERR\5/16\NC 7501271 MAG\PL\14X6X1-1/2 4704355...

  • Page 93: Non-Magnetic Conveyor Chute Assembly

    N O N - M A G N E T I C C O N V E Y O R C H U T E A S S E M B L Y ITEM PART NO. QTY. DESCRIPTION 4704535 CHUTE\NON-MAG\CNVYR\WELD\EXTENSION CNVYR C M F - 9 8 0 P A R T S R E F E R E N C E...

  • Page 94: Non-Magnetic Conveyor End Gate Assembly

    N O N - M A G N E T I C C O N V E Y O R E N D G A T E A S S E M B L Y ITEM PART NO. QTY. DESCRIPTION 4704563 GATE\END\CNVYR 4704594...

  • Page 95: Magnetic Conveyor End Gate Assembly

    M A G N E T I C C O N V E Y O R E N D G A T E A S S E M B L Y ITEM PART NO. QTY. DESCRIPTION 4704565 MAG\END\GATE\CNVYR 4704594 LATCH\GATE\END\CNVYR\L 4704595 LATCH\GATE\END\CNVYR\R 4800153...

  • Page 96: Hydraulic Tank Assembly

    H Y D R A U L I C T A N K A S S E M B L Y C M F - 9 8 0 P A R T S R E F E R E N C E...
  • Page 97 H Y D R A U L I C T A N K A S S E M B L Y ITEM PART QTY. PART DESCRIPTION 4704505 TANK\HYD\WELD\CMF 7500275 CAP\VENTED\TANK\OIL 7501242 GAUGE\LEVEL\5\M12\NOTHERMOMETER 4504506 TANK\HYD\ASSY\CMF C M F - 9 8 0 P A R T S R E F E R E N C E...

  • Page 98: Single Discharge Conveyor Hydraulics

    S I N G L E D I S C H A R G E C O N V E Y O R H Y D R A U L I C S C M F - 9 8 0 P A R T S R E F E R E N C E...

  • Page 99: Single Discharge Conveyor Hydraulics - Detail A

    S I N G L E D I S C H A R G E C O N V E Y O R H Y D R A U L I C S - D E T A I L A C M F - 9 8 0 P A R T S R E F E R E N C E...

  • Page 100: Single Discharge Conveyor Hydraulics - Detail B

    S I N G L E D I S C H A R G E C O N V E Y O R H Y D R A U L I C S - D E T A I L B C M F - 9 8 0 P A R T S R E F E R E N C E...

  • Page 101: Single Discharge Conveyor Hydraulics - Details C And D

    S I N G L E D I S C H A R G E C O N V E Y O R H Y D R A U L I C S - D E T A I L S C A N D D C M F - 9 8 0 P A R T S R E F E R E N C E...

  • Page 102: Single Discharge Conveyor Hydraulics - Details E And F

    S I N G L E D I S C H A R G E C O N V E Y O R H Y D R A U L I C S - D E T A I L S E A N D F C M F - 9 8 0 P A R T S R E F E R E N C E...
  • Page 103 S I N G L E D I S C H A R G E C O N V E Y O R H Y D R A U L I C S ITEM PART QTY. PART DESCRIPTION 3800448 FTG\7/8MORX7/8MJIC\ST 3800453 FTG\3/4MORX9/16MJIC\90 3800461...

  • Page 104: Gearbox Hydraulic Schematic

    G E A R B O X H Y D R A U L I C S C H E M A T I C C M F - 9 8 0 P A R T S R E F E R E N C E...
  • Page 105 G E A R B O X H Y D R A U L I C S C H E M A T I C ITEM PART QTY. PART DESCRIPTION 3100226 GRBX\PLANETARY\DBL\2100 3800135 FTG\LUB\1/8MPXZRK\SHORT 3800514 FTG\1/4MPX1/8FP\ADPT 3800537 FTG\3/4MORX3/4MJIC\90 3800826 FTG\3/4FJICX1/2SHLCK 3800861 FTG\7/8MJICX1/2FP\BULKHEAD 3800862...

  • Page 106: Optional Dogleg Conveyor Hydraulic Schematic

    O P T I O N A L D O G L E G C O N V E Y O R H Y D R A U L I C S C H E M A T I C C M F - 9 8 0 P A R T S R E F E R E N C E...

  • Page 107: Optional Dogleg Conveyor Hydraulic Schematic Detail A

    O P T I O N A L D O G L E G C O N V E Y O R H Y D R A U L I C S C H E M A T I C - D E T A I L A C M F - 9 8 0 P A R T S R E F E R E N C E...

  • Page 108: Optional Dogleg Conveyor Hydraulic Schematic Detail B

    O P T I O N A L D O G L E G C O N V E Y O R H Y D R A U L I C S C H E M A T I C - D E T A I L B C M F - 9 8 0 P A R T S R E F E R E N C E...

  • Page 109: Optional Dogleg Conveyor Hydraulic Schematic Details C And D

    O P T I O N A L D O G L E G C O N V E Y O R H Y D R A U L I C S C H E M A T I C - D E T A I L S C A N D D C M F - 9 8 0 P A R T S R E F E R E N C E...

  • Page 110: Optional Dogleg Conveyor Hydraulic Schematic Detail E

    O P T I O N A L D O G L E G C O N V E Y O R H Y D R A U L I C S C H E M A T I C - D E T A I L E C M F - 9 8 0 P A R T S R E F E R E N C E...
  • Page 111 O P T I O N A L D O G L E G C O N V E Y O R H Y D R A U L I C S C H E M A T I C ITEM PART QTY.

  • Page 112: Orbit Motors 3900025-3900032

    O R B I T M O T O R S 3 9 0 0 0 2 5 - 3 9 0 0 0 3 2 C M F - 9 8 0 P A R T S R E F E R E N C E...
  • Page 113 O R B I T M O T O R S 3 9 0 0 0 2 5 - 3 9 0 0 0 3 2 ITEM PART QTY. PART DESCRIPTION 3900025 MTR\HYD\17.9\H\A;MNT\7/8FOR O-RING THREAD 3900032 MTR\HYD\101-1040\22.6CI O-RING 3900002 MOUNTING FLANGE 6200011 KEY\WDF\1/4X1\#15\808 7501038...

  • Page 114: Hydraulic Cylinder Assembly

    H Y D R A U L I C C Y L I N D E R A S S E M B L Y C M F - 9 8 0 P A R T S R E F E R E N C E...
  • Page 115 H Y D R A U L I C C Y L I N D E R A S S E M B L Y ITEM PART QTY. PART DESCRIPTION 4100247 CYL\HYD\2X30\1-1/8_ROD (USED ON TUB DOOR) CYL\HYD\2X16\1-1/4ROD\WLD (USED ON CONVEYORS) 4100284 C M F - 9 8 0 P A R T S R E F E R E N C E...

  • Page 116: 3100225 - 2-Speed Gearbox Assembly

    3 1 0 0 2 2 5 - 2 - S P E E D G E A R B O X A S S E M B L Y C M F - 9 8 0 P A R T S R E F E R E N C E...
  • Page 117 3 1 0 0 2 2 5 - 2 - S P E E D G E A R B O X A S S E M B L Y ITEM PART QTY. PART DESCRIPTION 3100225 GRBX\2SPD\1.84:1\B&P6078 3100412 ORING\STD\3375 3100413 SEAL\OIL\B&P\45X85X10 3100414 SEAL\OIL\B&P\50X90X10...
  • Page 118 A Tradition of Innovation Since 1966 C M F - 9 8 0 P A R T S R E F E R E N C E...

  • Page 119: 3100226 - Planetarhy Gearbox Assembly

    3 1 0 0 2 2 6 - P L A N E T A R H Y G E A R B O X A S S E M B L Y C M F - 9 8 0 P A R T S R E F E R E N C E...

  • Page 120: Hub And Swivel Assembly

    H U B A N D S W I V E L A S S E M B L Y C M F - 9 8 0 P A R T S R E F E R E N C E...
  • Page 121 H U B A N D S W I V E L A S S E M B L Y ITEM PART QTY. PART DESCRIPTION 2900146 CAP\DUST\H817 2900149 HUB\H817\CUP\OUTER 2900150 HUB\H817\CONE\OUTER 2900154 HUB\ASSY\10-BOLT\11.25”BC (INCLUDES #1-3 & 5-13) 2900156 H1010-11\CONE\INNER 2900157 CUP\INNER\WHL:HUB(48510 2900158 SEAL\GREASE\H817...

  • Page 122: 2-Speed Driveline - 3700783

    2 - S P E E D D R I V E L I N E - 3 6 0 0 7 8 3 ITEM PART NO. DESCRIPTION 3600784 JOINT&SHFT\44E\WWCV\20SPL 3600586 GUARD\PTO\FRNT\OUTER 3600587 JOINT&TUBE\44E\U\20SPL 3600588 GUARD\PTO\REAR\INNER 3600489 KIT\REP\NYLON\PLSTC;SHLD C M F - 9 8 0 P A R T S R E F E R E N C E...

  • Page 123: 2-Speed Driveline - 3600785

    2 - S P E E D D R I V E L I N E - 3 6 0 0 7 8 5 ITEM PART NO. DESCRIPTION 3600621 JOINT&TUBE\44E\CV\21SPL 3600786 JOINT&SHFT\44E\1-3/8 WWCV 3600623 GUARD\PTO\FRNT\OUTER 3600624 GUARD\PTO\REAR\INNER 3600489 KIT\REP\NYLON\PLSTC;SHLD C M F - 9 8 0 P A R T S R E F E R E N C E...

  • Page 124: Driveline - 3600693

    D R I V E L I N E - 3 6 0 0 6 9 3 1-3/4 - 20 SPLINE ITEM PART NO. DESCRIPTION 3600591 YOKE&HUB\44E\CLTCH\20SPL 3600604 CROSS&BRG\44E\WSLR 3600696 CLUTCH\PACK\24K\AUTO 3600718 YOKE&SHAFT\44E\20SPL 3600719 YOKE&TUBE&SLEEVE\44E\20SPL 3600720 YOKE\44E\20SPL C M F - 9 8 0 P A R T S R E F E R E N C E...

  • Page 125: Driveline - 3600694

    D R I V E L I N E - 3 6 0 0 6 9 4 1-3/4 - 20 SPLINE ITEM PART NO. DESCRIPTION 3600606 CROSS&BRG\35E\WLSR 3600713 YOKE\35E\20SPL 3600750 YOKE&TUBE&SLEEVE\35E\20SPL 3600753 YOKE\CLUTCH\AUTO\ASSY\35SER\12K C M F - 9 8 0 P A R T S R E F E R E N C E...

  • Page 126: Decals

    D E C A L S CMF-980 C M F - 9 8 0 P A R T S R E F E R E N C E...
  • Page 127 D E C A L S ITEM PART QTY. PART DESCRIPTION 6500020 DECAL\LOGO\HYBSTR\SNBRS\3 6500043 DECAL\WARN\NO;RIDERS 6500085 DECAL\DNGR\ROTATNG;DR-LNE 6500208 DECAL\WARN\GENERAL 6500220 DECAL\WARN\HI;PRESS;FLUID 6500253 DECAL\INFO\FLUID;LEVEL\INDICATOR 6500302 9’-2” DECAL\LOGO\STRIP\3\RD&BLK 6500304 DECAL\LOGO\HYBSTR\1-3/4\W/SUNBURST 6500339 DECAL\WARN\PINCH;POINT 6500366 DECAL\SMV 6500383 DECAL\WARN\AUGER\MIXER 6500417 DECAL\GREASE\10 HRS 6500434 DECAL\2X9\RED\REFCT 6500435 DECAL\2X9\AMBER\REFCT 6500437 DECAL\LOCATOR\DOOR...

  • Page 128: Decal Locations

    D E C A L L O C A T I O N S DOGLEG CONVEYOR 6500208 6500043 6500304 6500339 6500339 6500488 6500220 6500488 6500490 6500085 6500487 6500043 STANDARD CONVEYOR 6500304 6500339 6500339 6500488 6500488 6500220 6500208 6500085 6500487 6500043 6500490 6500435 6500435...
  • Page 129 D E C A L L O C A T I O N S 6500020 6500302 6500522 6500383 6500366 6500434 6500253 6500417 6500253 6500417 C M F - 9 8 0 P A R T S R E F E R E N C E...

  • Page 130: Cmf Tail Lights Wiring Schematic

    C M F T A I L L I G H T S W I R I N G S C H E M A T I C C M F - 9 8 0 P A R T S R E F E R E N C E...

  • Page 131: Documentation Comment Form

    CMF-980 Documentation Comment Form DuraTech Industries welcomes your comments and suggestions regarding the quality and usefulness of this manual. Your comments help us improve the documentation to better meet your needs. • Did you find any errors? • Is the information clearly presented? • Does the manual give you all the information you need to operate the equipment safely and effectively? • Are the diagrams and illustrations correct? • Do you need more illustrations?
  • Page 132 Please fill out the delivery report on the following pages. The white copy is to be returned to: DuraTech Industries International Inc. P.O. Box 1940 Jamestown, ND 58402-1940 The yellow copy is the dealer copy; the pink copy is to be retained by the customer.

Table of Contents