1. Manuals
  2. Brands
  3. DuraTech Industries Manuals
  4. Farm Equipment
  5. HAYBUSTER CMF-700
  6. Operating instructions and parts reference

DuraTech Industries HAYBUSTER CMF-700 Operating Instructions And Parts Reference

Vertical mixer
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
CMF-700
TM
VERTICAL
MIXER
S.N. 700GJ0013 UP TO 700120077
Includes Truck Mount Supplement
Operating Instructions
and Parts Reference
PO B
1940, J
, nD 58402-1940
Ox
amestOwn
a
2016
O
i
0500130
Pril
rigiOnal
nstructiOns

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HAYBUSTER CMF-700 and is the answer not in the manual?

Questions and answers

Related Manuals for DuraTech Industries HAYBUSTER CMF-700

Summary of Contents for DuraTech Industries HAYBUSTER CMF-700

  • Page 1 CMF-700 VERTICAL MIXER S.N. 700GJ0013 UP TO 700120077 Includes Truck Mount Supplement Operating Instructions and Parts Reference PO B 1940, J , nD 58402-1940 amestOwn 2016 0500130 Pril rigiOnal nstructiOns...
  • Page 2 A Tradition of Innovation Since 1966...
  • Page 3 This manual, as well as materials provided by component suppliers to DuraTech Industries are all considered to be part of the information package. Every operator is required to read and understand these manuals, and they should be located within easy access for periodic review.
  • Page 4 A Tradition of Innovation Since 1966...
  • Page 5 This vertical mixer is not to be used for any purpose other than for which it is intended as explained in the operator’s manual, advertising material and other pertinent written material prepared by DuraTech Industries. Any machine subject to misuse may cause personal injury or death, and void manufactures warranty.
  • Page 6 F O R E W O R D Purpose The purpose of this owner’s manual is to explain maintenance requirements and routine adjustments for the most efficient operation of your CMF-700. There is also a trouble shooting section that may help in case of problems in the field. Any information not covered in this manual may be obtained from your dealer.
  • Page 7 F O R E W O R D Dealer responsibilities • Read Section 2, “Dealer Preparation,” and perform the tasks outlined. Also perform a pre-operation inspection as described in Section 3. • Upon delivery of the unit to the customer, it is your responsibility to conduct a training session on the safe operation of the unit for primary operator(s).

  • Page 8: Table Of Contents

    T A B L E O F C O N T E N T S Part I: Operating instructions ..........1 Section 1: Safety ................. 2 1.1 Safety-alert symbols ..................2 1.2 Operator - personal equipment ................4 1.3 Machine safety labels ..................5 1.5 Safety review section ..................
  • Page 9 T A B L E O F C O N T E N T S Section 4: Lubrication ............... 25 4.1 Lubrication ...................... 25 4.2 General appearance ..................30 Section 5: Troubleshooting ............31 Section 6: Options..............32 6.1 Rear bay door ....................32 6.2 Magnetic extension spouts ................
  • Page 10 T A B L E O F C O N T E N T S Part II : Parts Reference ..........47 TUB ASSEMBLY (FOR S.N. GJ0013 TO GJ0027) ..........48 TUB ASSEMBLY (FOR S.N. 700HJ0028 AND UP) ..........50 TUB LINER ASSEMBLY (FOR S.N. 700HJ0028 AND UP) ....... 52 MAINFRAME (STANDARD) (FOR S.N.
  • Page 11 T A B L E O F C O N T E N T S COMPLETE RIGHT HAND DISCHARGE CONVEYOR ASSEMBLY (FOR S.N. UP TO 700HJ0047) ................86 COMPLETE RIGHT HAND DISCHARGE CONVEYOR ASSEMBLY (FOR S.N. 700100048 AND UP) ................88 DUAL DISCHARGE CONVEYOR ASSEMBLY (OPTION) (FOR S.N.
  • Page 12 T A B L E O F C O N T E N T S MAIN CONVEYOR ASSEMBLY-4704972 - DETAIL A (USE W/LH DISCHARGE) (FOR S.N. 700100048 AND UP)......108 MAIN CONVEYOR ASSEMBLY-4704972 - PARTS LIST (USE W/LH DISCHARGE) (FOR S.N. 700100048 AND UP)......109 OPTIONAL-LH DOGLEG DISCHARGE CONVEYOR ........
  • Page 13 T A B L E O F C O N T E N T S HUB AND SWIVEL AXLE (S.N. 700HJ0028 AND UP) ........152 STANDARD DRIVELINE - 3600530 ..............154 STANDARD DRIVELINE - 3600526 ..............155 STANDARD DRIVELINE - 3600493 (FOR S.N. UP TO 700GJ0027) ....156 STANDARD DRIVELINE - 3600647 (FOR S.N.
  • Page 14 T A B L E O F C O N T E N T S HYDRAULIC TANK ................... 198 HYDRAULIC RADIATOR ................200 AUXILIARY VALVE ..................202 AUXILIARY VALVE ..................204 DOOR AND CONVEYOR CYLINDERS ............206 CONVEYOR MOTORS ..................208 HYDRO PUMPS ....................

  • Page 15: Part I: Operating Instructions

    CMF-700 VERTICAL MIXER S.N. 700GJ0013 UP TO 700120077 Includes Truck Mount Supplement PART 1: Operating Instructions C M F - 7 0 0 O P E R A T I N G I N S T R U C T I O N S...

  • Page 16: Section 1: Safety

    Section 1: Safety The safety of the operator is of great importance to DuraTech Industries. We have provided decals, shield and other safety features to aid you in using your machine safely. In addition, we ask you to be a careful operator who will properly use and service your Haybuster equipment.
  • Page 17 DANGER: Indicates an imminently hazardous situation that, if not avoided, will result in death or serious injury. This signal word is to be limited to the most extreme situations, typically for machine components that, for functional purposes, cannot be guarded. WARNING: Indicates a potentially hazardous situation that, if not avoided, could result in death or serious injury, and includes hazards...

  • Page 18: Operator - Personal Equipment

    1.2 Operator - personal equipment THE OPERATOR Physical Condition You must be in good physical condition and mental health and not under the influence of any substance (drugs, alcohol) which might impair vision, dexterity or judgment. Do not operate a CMF-700 VERTICAL MIXER when you are fatigued. Be alert ‑ If you get tired while operating your CMF-700 VERTICAL MIXER, take a break.

  • Page 19: Machine Safety Labels

    Machine safety labels The safety decals located on your machine contain important information that will help you operate your equipment. Become familiar with the decals and their locations. DANGER: ROTATING DRIVELINE, CONTACT CAN CAUSE DEATH, KEEP AWAY! DO NOT OPERATE WITHOUT •...
  • Page 20 WARNING: PINCH POINT STAY BACK 6500339 WARNING: FOR YOUR PROTECTION AND SAFETY OF OTHERS, FOLLOW THESE SAFETY RULES. Read and understand operators manual before operating machine. Place all controls in neutral, stop engine, remove ignition key, lock out power source, and wait for all motion to stop before servicing, 6500208 adjusting, repairing, or unplugging.
  • Page 21 WARNING: Risk of eye injury Eye Protection required 6500487 WARNING: Moving parts can crush and cut. Keep hands clear. 6500488 WARNING: Noise hazzard. Ear protection required. 6500489 WARNING: Noise hazzard. Ear protection required. 6500490 CAUTION: ADJUST TRACTOR DRAWBAR SO THAT THE DISTANCE FROM THE END OF THE P.T.O.
  • Page 22 CAUTION: ADJUST TRACTOR DRAWBAR SO THAT THE DISTANCE FROM THE END OF THE P.T.O. SHAFT ON THE TRACTOR TO THE CENTER OF THE DRAWBAR HITCH PIN IS 20”. 6500391 ADJUST THE HITCH CLEVIS SO THE MACHINE IS PARALLEL WITH THE GROUND WHEN HITCHED TO TRACTOR.

  • Page 23: Safety Review Section

    1.4 Shielding Shields are installed for your protection. Keep them in place, and replace damaged shields. figure 1.1 PTO driveline shield shield CAUTION! NO STEP! DO NOT STEP OR STAND AT THIS LOCATION figure 1.2 Orbit motor auger drive shield shield 1.5 Safety review section BEFORE OPERATING...
  • Page 24 Allow only responsible, properly instructed individuals to operate your machine. Provide proper training • and carefully supervise inexperienced operators. Use a tractor which meets the tractor requirement contained within this manual. Additional weights may • be necessary. Make sure all bystanders and other workers are clear before starting the tractor and CMF‑700. •...
  • Page 25 If equipment has been altered in any way from its original design, DuraTech Industries does not accept any liability for injury or warranty.

  • Page 26: Towing/Road Transport

    1.6 Towing/road transport Use good judgment and drive slowly over rough or uneven terrain. • Avoid loose fill, rocks and holes; they can be dangerous for equipment operation or movement. Allow for • unit length when making turns. Be sure tractor brakes are properly adjusted and foot pedals are locked together. •...

  • Page 27: Section 2: Dealer Preparation

    Section 2: Dealer Preparation 2.1 Pre-delivery inspection Instructions: Before delivering the machine, check the following items carefully and make corrections when necessary. Place an “X” in the box after each item has been checked and found to be acceptable. Check machine for missing items or damage in transit. Check for loose bolts.

  • Page 28: Section 3: Operation

    Section 3: Operation To insure long life and economical operation, we highly recommend the operator of the CMF‑700 be thoroughly instructed in the maintenance and operation of the machine. There is no substitute for a sound preventative maintenance program and well trained operator. Prior to starting the engine of the tractor, we recommend the operator make a visual inspection of the unit.

  • Page 29: Pre-Starting Inspection Instructions

    3.1 Pre-starting inspection instructions WARNING: Before inspecting the machine, use the normal shut‑down procedure in Section 3.11. Check the following: Hydraulic components for leaks or damage. Warning: Hydraulic fluid escaping under pressure can be almost invisible and can have sufficient force to penetrate the skin.

  • Page 30: Setup And Adjustments

    3.2 Setup and Adjustments 3.2.1 Hitch Adjustments The hitch is adjustable so that the machine is parallel to the ground when attached to the tractor drawbar. This is accomplished by removing the two mounting bolts and reinstalling them with the hitch at the proper height. The distance from the end of the P.T.O.

  • Page 31: Shield

    When hooking up the machine, install a proper hitch pin and secure it with a hairpin clip or comparable device, crank the jack until the foot of the jack is fully raised. Remove the jack pin and relocate the jack to the storage location. Reinstall the jack pin.

  • Page 32: Tires And Rims

    3.2.5 Tires and Rims Tires should be inflated to 85 PSI (586 KPa) cold and should be free of cuts or cracks. There should also be adequate tread and no visible cords, wires or tread separation. Tires must also be of proper load rating, speed rating and size. Rims must be free of cracks and rust pitting.

  • Page 33: Free Motion Automatic Clutch

    3.2.8 Free motion automatic clutch Torque protection is built into the PTO driveline with two free motion automatic clutches. These clutches are located on each driveline immediately before each gearbox. When overload occurs the clutch disengages and does not reengage until the driveline speed is reduced to near zero. The clutch makes a loud click when it disengages.

  • Page 34: Hitching The Cmf-700

    3.3 Hitching the CMF-700 Warning: Do not operate the CMF‑700 unless the tractor complies with the following requirements: Tractor has a minimum of 135 horsepower. (without two‑speed option) • Tractor has rollover protective structure and seatbelts. • Tractor’s hydraulic system has at least (2) two‑way valves, and a minimum •...

  • Page 35: Unhitching The Cmf-700

    This machine is set up to operate on 1000 rpm only! If required, install the safety chain. Check local regulations regarding safety chain requirements. Refer to figure 3.7 figure 3.7 Safety chain installation Connect the two hydraulic hoses from the hydraulic door cylinder to one set of hydraulic couplers on the tractor.

  • Page 36: Operation Precautions And Instructions

    3.5 Operation precautions and instructions Make sure there are no bystanders in the way. • Before loading, run the mixer empty and check all operations. • Do not overload the mixer. Maximum load is 21,500 lbs. (9,752 kg) Maximum load is determined by •...

  • Page 37: Unloading

    3.8 Unloading To unload the CMF‑700, perform the following steps: If possible, move the mixer to the unloading site while finishing the mixing stage to avoid the need for loaded PTO start‑up. Align CMF with bunk and lower the conveyor extension to desired angle (if equipped). Engage the chain conveyor;...

  • Page 38: Light Kit

    3.10 Removing the CMF-700 from storage To remove the CMF‑700 from storage, perform the following steps: Remove all protective coverings. Remove blockings from under the CMF‑700. Check tire pressure. Lubricate machine in accordance with lubrication instructions found in this manual. Check the conveyor chain tension.

  • Page 39: Section 4: Lubrication

    Section 4: Lubrication The operator should make a check of all grease fittings on the unit before beginning to operate it so as to become familiar with their location and correct service schedule. Warning: Use normal shut‑down procedure (Section 3.11) before lubricating the machine. Lubrication Use only a high quality, #2 multi‑purpose grease when lubricating the unit.
  • Page 40 figure 4.1 P.T.O. Universal joint (1 of 8) P.T.O. universal joint lubrication zerk figure 4.2 P.T.O. Universal joint (2, 3, & 4 of 8) P.T.O. universal joint lubrication zerks figure 4.3 P.T.O. Universal joint (5 of 8), and P.T.O stand bearing (1 of 1) P.T.O.
  • Page 41 figure 4.4 P.T.O. Universal joint (6 of 8), and automatic clutch automatic clutch P.T.O. universal joint lubrication zerk figure 4.5 P.T.O. Universal joint (7 of 8) P.T.O. universal joint lubrication zerk figure 4.6 P.T.O. Universal joint (8 of 8), and automatic clutch automatic clutch P.T.O.
  • Page 42 figure 4.7 Conveyor bearings lubrication point (1 of 2) conveyor bearings lubrication zerk figure 4.8 Extention conveyor bearings lubrication point (1 of 4) extention conveyor bearings lubrication zerk figure 4.9 Telescoping P.T.O. shaft telescoping shaft C M F - 7 0 0 O P E R A T I N G I N S T R U C T I O N S...
  • Page 43 Lubrication cont. Wheel bearings: repack annually Gearbox: Grease 20‑30 pumps every 250 hours (each gearbox), located on the bottom of the tub in front of the left tires. Chains: Oil conveyor chains every 15 hours. When to change oil in gearboxes: After the first 50‑100 hours of operation, drain initial oil, preferably when box is warm.

  • Page 44: General Appearance

    chart 4.1 lubrication chart for reduction gears 4.2 General appearance Clean all mud, dirt, grease and other foreign material from the exterior of the machine. Wash the entire machine. Repaint places where bare metal is exposed. C M F - 7 0 0 O P E R A T I N G I N S T R U C T I O N S...

  • Page 45: Section 5: Troubleshooting

    Section 5: Troubleshooting chart 5.1 Troubleshooting chart C M F - 7 0 0 O P E R A T I N G I N S T R U C T I O N S...

  • Page 46: Section 6: Options

    Section 6: Options Rear bay door figure 6.1 Optional rear door rear door Magnetic extension spouts figure 6.2 Magnetic extension spout extension spout magnets Non-magnetic extension spout figure 6.3 Non-magnetic extension spout angle adjustment bolt extension spout C M F - 7 0 0 O P E R A T I N G I N S T R U C T I O N S...

  • Page 47: Two-Speed Gearbox

    Two-Speed Gearbox figure 6.4 Two speed gearbox in low speed position figure 6.5 Handle for two speed gearbox in low position C M F - 7 0 0 O P E R A T I N G I N S T R U C T I O N S...
  • Page 48 figure 6.6 Two speed gearbox in high position figure 6.7 Handle for two speed gearbox in high position C M F - 7 0 0 O P E R A T I N G I N S T R U C T I O N S...

  • Page 49: Section 7: Maintenance

    Section 7: Maintenance Welding Procedure CMF‑700 welding procedures for machines with a weight scale Precautions are required for welding on machines with electronic components. Electronic components including but not limited to: electronic scales. Proper welding procedures are necessary with in order to avoid damage to the components, their sensors, and associated components.

  • Page 50: Appendix A: Warranty

    This warranty is limited to the replacement of any defective part or parts if DuraTech Industries is notified within thirty (30) days or failure.

  • Page 51: Appendix B: Cmf-700 Specifications

    Appendix B: CMF-700 Specifications General specifications Max. Weight ................17,000 LBS (7,711 kg) Overall length, including trailer ............296” (752 cm) Overall width ..................121” (307 cm) Tractor P.T.O speed …(1‑3/8” 21 spline) ............1000 Minimum horsepower required ................135 Mixing capacity, cu. ft ............705/830 (20/24 cu. m) Max.
  • Page 52 CMF-700 VERTICAL MIXER S.N. 700HJ0002TRK AND UP Truck Mount Supplement Operating Instructions C M F - 7 0 0 O P E R A T I N G I N S T R U C T I O N S...

  • Page 53: Truck Mount Operators Manual Supplement

    CMF-700 Truck Mount Operators Manual Supplement This is a supplement to the CMF‑700 Operator Manual and Parts book. The main part of this book applies to this CMF‑ 700 Truck Mount except where described in this attached supplement. Before Starting the CMF-700 Truck Mount review all: Safety Recommendations ‑...

  • Page 54: Supplement Section 1: Control Panel In Truck Cab

    Supplement Section 1: Control Panel in truck cab CONTROL PANEL The control panel is located inside the truck cab. Controls on the control panel include; power switch for the control panel, auger speed display, auger rpm adjustment slow/fast, augers forward/reverse, conveyor on/off, tub front door open/closed, extension conveyor raise/lower, auger rpm adjustment high/low.

  • Page 55: Supplement Section 2: Loading And Processing For The Cmf Truck Mount

    Supplement Section 2: Loading and processing for the CMF TRUCK MOUNT The truck engine should be running from 1,700 – 2,000 RPM. Two speed should be set to low (High is only for cleanout!) Adjust mixer speed accordingly, 15‑25 RPM depending on commodities and mixing time. Slower RPM speed reduces spillage and overprocessing.
  • Page 56 EXTENSION CONVEYOR BEARING LUBRICATION ZERK EXTENSION CONVEYOR PIN INSIDE C M F - 7 0 0 O P E R A T I N G I N S T R U C T I O N S...

  • Page 57: Supplement Section 4: Hydraulic System And Hydrostatic Pump Filters

    DuraTech Industries recommends using Cenex Qwicklift HTB if your machine has a Qwicklift decal on the hydraulic tank. Other acceptable fluids include Mobil 423, Farmland Super HTB, Conoco Hydroclear Power Tran Fluid or other similar fluids. If the hydraulic tank does not have this decal, then all of the above fluids are acceptable.

  • Page 58: Supplement Section 5: Replacement Service Parts

    Supplement Section 5: Replacement Service parts Replacement Service Parts for Eaton Tandem Hydrostatic Pump Duratech Part # Duratech Description Eaton Part # 4200144 SEAL\KIT\PUMP\COMPLETE\HYDRO\CMF700_TRUCK 990710-000 4200145 SEAL\KIT\PUMP\SHAFT_ONLY\HYDRO\CMF700_TRCK 990709-000 4200146 VALVE\RELIEF\CHARGE\LOW\HYDRO\CMF_TRUCK 103072-035 4200147 VALVE\RELIEF\HIGH_PRESS\HYDRO\CMFTRUCK 110700-650 4200148 VALVE\PRESSURE\OVERRIDE\HYDRO\CMFTRUCKS 4994730-600 4200149 COIL\CNTRL\PUMP\ASSY\12VDC 114241-012 4200150 TUBE\COIL\CNTRL\PUMP\ASSY 111501-000...

  • Page 59: Truck Mount Specifications

    CMF-700 Truck Mount Specifications Overall length ................... 424” (1,077 cm) Overall width ..................121” (307 cm) Mixing capacity, cu. ft ............705/803 (20/24 cu. m) Loading height with extensions ............129” (328 cm) Loading height without extensions .............121” (307 cm) C M F - 7 0 0 O P E R A T I N G I N S T R U C T I O N S...

  • Page 60: Sound Pressure Level And Sound Power Level Information

    C M F - 7 0 0 O P E R A T I N G I N S T R U C T I O N S...

  • Page 61: Part Ii : Parts Reference

    CMF-700 VERTICAL MIXER S.N. 700GJ0013 UP TO 700120077 Includes Truck Mount Supplement Part 2: Parts Reference...

  • Page 62: Tub Assembly (For S.n. Gj0013 To Gj0027)

    T U B A S S E M B L Y ( F O R S . N . G J 0 0 1 3 T O G J 0 0 2 7 ) C M F - 7 0 0 P A R T S R E F E R E N C E...
  • Page 63 T U B A S S E M B L Y ( F O R S . N . G J 0 0 1 3 T O G J 0 0 2 7 ) ITEM PART QTY. PART DESCRIPTION 3100207 GRBX\PLANETARY\SNGL\1750 3100208 GRBX\PLANETARY\DBL\1750...

  • Page 64: Tub Assembly (For S.n. 700Hj0028 And Up)

    T U B A S S E M B L Y ( F O R S . N . 7 0 0 H J 0 0 2 8 A N D U P ) C M F - 7 0 0 P A R T S R E F E R E N C E...
  • Page 65 T U B A S S E M B L Y ( F O R S . N . 7 0 0 H J 0 0 2 8 A N D U P ) ITEM PART QTY. PART DESCRIPTION 3100215 GRBX\PLANETARY\SNGL\1750 3100216 GRBX\PLANETARY\DBL\1750...

  • Page 66: Tub Liner Assembly (For S.n. 700Hj0028 And Up)

    T U B L I N E R A S S E M B L Y ( F O R S . N . 7 0 0 H J 0 0 2 8 A N D U P ) C M F - 7 0 0 P A R T S R E F E R E N C E...
  • Page 67 T U B L I N E R A S S E M B L Y ( F O R S . N . 7 0 0 H J 0 0 2 8 A N D U P ) ITEM PART QTY.

  • Page 68: Mainframe (Standard) (For S.n. Gj0013 To Gj0027)

    M A I N F R A M E ( S T A N D A R D ) ( F O R S . N . G J 0 0 1 3 T O G J 0 0 2 7 ) C M F - 7 0 0 P A R T S R E F E R E N C E...
  • Page 69 M A I N F R A M E ( S T A N D A R D ) ( F O R S . N . G J 0 0 1 3 T O G J 0 0 2 7 ) ITEM PART QTY.

  • Page 70: Mainframe With 2 Speed Gearbox (Option) (For S.n. Gj0013 To Gj0027)

    M A I N F R A M E W I T H 2 S P E E D G E A R B O X ( O P T I O N ) ( F O R S . N . G J 0 0 1 3 T O G J 0 0 2 7 ) C M F - 7 0 0 P A R T S R E F E R E N C E...
  • Page 71 M A I N F R A M E W I T H 2 S P E E D G E A R B O X ( O P T I O N ) ( F O R S . N . G J 0 0 1 3 T O G J 0 0 2 7 ) ITEM PART QTY.

  • Page 72: Mainframe Assembly (For S.n. 700Hj0028 And Up)

    M A I N F R A M E A S S E M B L Y ( F O R S . N . 7 0 0 H J 0 0 2 8 A N D U P ) C M F - 7 0 0 P A R T S R E F E R E N C E...
  • Page 73 M A I N F R A M E A S S E M B L Y ( F O R S . N . 7 0 0 H J 0 0 2 8 A N D U P ) ITEM PART QTY.

  • Page 74: Drive Line Option - Standard - 1-3/4 Cv

    D R I V E L I N E O P T I O N - S T A N D A R D - 1 - 3 / 4 C V ( F O R S . N . 7 0 0 H J 0 0 2 8 A N D U P ) C M F - 7 0 0 P A R T S R E F E R E N C E...
  • Page 75 D R I V E L I N E O P T I O N - S T A N D A R D - 1 - 3 / 4 C V ( F O R S . N . 7 0 0 H J 0 0 2 8 A N D U P ) ITEM PART QTY.

  • Page 76: Drive Line Option - 2 Speed Gearbox - 1-3/4 Cv

    D R I V E L I N E O P T I O N - 2 S P E E D G E A R B O X - 1 - 3 / 4 C V ( F O R S . N . 7 0 0 H J 0 0 2 8 T O 7 0 0 1 0 0 0 6 2 ) C M F - 7 0 0 P A R T S R E F E R E N C E...

  • Page 77: Drive Line Option - 2 Speed Gearbox - 1-3/4 Cv

    D R I V E L I N E O P T I O N - 2 S P E E D G E A R B O X - 1 - 3 / 4 C V ( F O R S . N . 7 0 0 H J 0 0 2 8 T O 7 0 0 1 0 0 0 6 2 ) ITEM PART QTY.

  • Page 78: (For S.n. 700100063 And Up)

    D R I V E L I N E O P T I O N - 2 S P E E D G E A R B O X - 1 - 3 / 4 C V ( F O R S . N . 7 0 0 1 0 0 0 6 3 A N D U P ) C M F - 7 0 0 P A R T S R E F E R E N C E...
  • Page 79 D R I V E L I N E O P T I O N - 2 S P E E D G E A R B O X - 1 - 3 / 4 C V ( F O R S . N . 7 0 0 1 0 0 0 6 3 A N D U P ) ITEM PART QTY.

  • Page 80: (For S.n. 700Hj0028 To 700100062)

    D R I V E L I N E O P T I O N - 2 S P E E D G E A R B O X - 1 - 3 / 8 C V ( F O R S . N . 7 0 0 H J 0 0 2 8 T O 7 0 0 1 0 0 0 6 2 ) C M F - 7 0 0 P A R T S R E F E R E N C E...
  • Page 81 D R I V E L I N E O P T I O N - 2 S P E E D G E A R B O X - 1 - 3 / 8 C V ( F O R S . N . 7 0 0 H J 0 0 2 8 T O 7 0 0 1 0 0 0 6 2 ) ITEM PART QTY.

  • Page 82: Drive Line Option - 2 Speed Gearbox - 1-3/8 Cv (For S.n. 700100063 And Up)

    D R I V E L I N E O P T I O N - 2 S P E E D G E A R B O X - 1 - 3 / 8 C V ( F O R S . N . 7 0 0 1 0 0 0 6 3 A N D U P ) C M F - 7 0 0 P A R T S R E F E R E N C E...
  • Page 83 D R I V E L I N E O P T I O N - 2 S P E E D G E A R B O X - 1 - 3 / 8 C V ( F O R S . N . 7 0 0 1 0 0 0 6 3 A N D U P ) ITEM PART QTY.

  • Page 84: Drive Line Option - Standard - 1-3/8 Cv (For S.n. 700Hj0028 And Up)

    D R I V E L I N E O P T I O N - S T A N D A R D - 1 - 3 / 8 C V ( F O R S . N . 7 0 0 H J 0 0 2 8 A N D U P ) C M F - 7 0 0 P A R T S R E F E R E N C E...
  • Page 85 D R I V E L I N E O P T I O N - S T A N D A R D - 1 - 3 / 8 C V ( F O R S . N . 7 0 0 H J 0 0 2 8 A N D U P ) ITEM PART QTY.

  • Page 86: Auger Assembly

    A U G E R A S S E M B L Y C M F - 7 0 0 P A R T S R E F E R E N C E...
  • Page 87 A U G E R A S S E M B L Y ITEM PART QTY. PART DESCRIPTION 4704313 AUGER\WELD\CMF700 4704884 COVER\AUGER 4800098 BOLT\HEX\3/8X1-1/4\NC 4801290 SCR\BUT\ALN\5/8X1-3/4\NC 4900002 NUT\HEX\3/8\NC 4900110 NUT\FLG\SERR\5/8\NC 5000019 WASH\LOCK\3/8 7501161 BLADE\CMF\STANDARD 4704315 AUGER\ASSY\CMF700 C M F - 7 0 0 P A R T S R E F E R E N C E...

  • Page 88: Left Hand Discharge Conveyor Assembly (For S.n. Up To 700Hj0047)

    L E F T H A N D D I S C H A R G E C O N V E Y O R A S S E M B L Y ( F O R S . N . U P T O 7 0 0 H J 0 0 4 7 ) C M F - 7 0 0 P A R T S R E F E R E N C E...
  • Page 89 L E F T H A N D D I S C H A R G E C O N V E Y O R A S S E M B L Y ( F O R S . N . U P T O 7 0 0 H J 0 0 4 7 ) ITEM PART QTY.

  • Page 90: Left Hand Discharge Conveyor Assembly (For S.n. 700100048 And Up)

    L E F T H A N D D I S C H A R G E C O N V E Y O R A S S E M B L Y ( F O R S . N . 7 0 0 1 0 0 0 4 8 A N D U P ) C M F - 7 0 0 P A R T S R E F E R E N C E...
  • Page 91 L E F T H A N D D I S C H A R G E C O N V E Y O R A S S E M B L Y ( F O R S . N . 7 0 0 1 0 0 0 4 8 A N D U P ) ITEM PART QTY.

  • Page 92: Complete Left Hand Discharge Conveyor Assembly (For S.n. Up To 700Hj0047)

    C O M P L E T E L E F T H A N D D I S C H A R G E C O N V E Y O R A S S E M B L Y ( F O R S .
  • Page 93 C O M P L E T E L E F T H A N D D I S C H A R G E C O N V E Y O R A S S E M B L Y ( F O R S .

  • Page 94: Complete Left Hand Discharge Conveyor Assembly (For S.n. 700100048 And Up)

    C O M P L E T E L E F T H A N D D I S C H A R G E C O N V E Y O R A S S E M B L Y ( F O R S .
  • Page 95 C O M P L E T E L E F T H A N D D I S C H A R G E C O N V E Y O R A S S E M B L Y ( F O R S .

  • Page 96: Right Hand Discharge Conveyor Assembly (For S.n. Up To 700Hj0047)

    R I G H T H A N D D I S C H A R G E C O N V E Y O R A S S E M B L Y ( F O R S . N . U P T O 7 0 0 H J 0 0 4 7 ) C M F - 7 0 0 P A R T S R E F E R E N C E...
  • Page 97 R I G H T H A N D D I S C H A R G E C O N V E Y O R A S S E M B L Y ( F O R S . N . U P T O 7 0 0 H J 0 0 4 7 ) ITEM PART QTY.

  • Page 98: Right Hand Discharge Conveyor Assembly (For S.n. 700100048 And Up)

    R I G H T H A N D D I S C H A R G E C O N V E Y O R A S S E M B L Y ( F O R S . N . 7 0 0 1 0 0 0 4 8 A N D U P ) C M F - 7 0 0 P A R T S R E F E R E N C E...
  • Page 99 R I G H T H A N D D I S C H A R G E C O N V E Y O R A S S E M B L Y ( F O R S . N . 7 0 0 1 0 0 0 4 8 A N D U P ) ITEM PART QTY.

  • Page 100: Complete Right Hand Discharge Conveyor Assembly (For S.n. Up To 700Hj0047)

    C O M P L E T E R I G H T H A N D D I S C H A R G E C O N V E Y O R A S S E M B L Y ( F O R S .
  • Page 101 C O M P L E T E R I G H T H A N D D I S C H A R G E C O N V E Y O R A S S E M B L Y ( F O R S .

  • Page 102: Complete Right Hand Discharge Conveyor Assembly (For S.n. 700100048 And Up)

    C O M P L E T E R I G H T H A N D D I S C H A R G E C O N V E Y O R A S S E M B L Y ( F O R S .
  • Page 103 C O M P L E T E R I G H T H A N D D I S C H A R G E C O N V E Y O R A S S E M B L Y ( F O R S .

  • Page 104: Dual Discharge Conveyor Assembly (Option) (For S.n. Up To 700Hj0047)

    D U A L D I S C H A R G E C O N V E Y O R A S S E M B L Y ( O P T I O N ) ( F O R S . N . U P T O 7 0 0 H J 0 0 4 7 ) C M F - 7 0 0 P A R T S R E F E R E N C E...
  • Page 105 D U A L D I S C H A R G E C O N V E Y O R A S S E M B L Y ( O P T I O N ) ( F O R S . N . U P T O 7 0 0 H J 0 0 4 7 ) ITEM PART QTY.

  • Page 106: Dual Discharge Conveyor Assembly (Option) (For S.n. 700100048 And Up)

    D U A L D I S C H A R G E C O N V E Y O R A S S E M B L Y ( O P T I O N ) ( F O R S . N . 7 0 0 1 0 0 0 4 8 A N D U P ) C M F - 7 0 0 P A R T S R E F E R E N C E...
  • Page 107 D U A L D I S C H A R G E C O N V E Y O R A S S E M B L Y ( O P T I O N ) ( F O R S . N . 7 0 0 1 0 0 0 4 8 A N D U P ) ITEM PART QTY.

  • Page 108: M A I N C O N V E Y O R A S S E M B L Y - 4 7 0 4 5 8 6 - S U B A S S E M B L Y 1

    M A I N C O N V E Y O R A S S E M B L Y - 4 7 0 4 5 8 6 - S U B A S S E M B L Y 1 ( U S E W / D U A L &...

  • Page 109: (Use W/ Dual & Rh Discharge) (For S.n. Up To 700Hj0047)

    M A I N C O N V E Y O R A S S E M B L Y - 4 7 0 4 5 8 6 - S U B A S S E M B L Y 2 ( U S E W / D U A L &...
  • Page 110 A Tradition of Innovation Since 1966 C M F - 7 0 0 P A R T S R E F E R E N C E...

  • Page 111: Main Conveyor Assembly-4704586 Parts List (For S.n. Up To 700Hj0047)

    M A I N C O N V E Y O R A S S E M B L Y - 4 7 0 4 5 8 6 P A R T S L I S T ( F O R S . N . U P T O 7 0 0 H J 0 0 4 7 ) ITEM PART QTY.

  • Page 112: Main Conveyor Assembly-4704973 - Sub Assembly 1 (Use W/ Dual & Rh Discharge) (For S.n. 700100048 And Up)

    M A I N C O N V E Y O R A S S E M B L Y - 4 7 0 4 9 7 3 - S U B A S S E M B L Y 1 ( U S E W / D U A L &...

  • Page 113: (Use W/ Dual & Rh Discharge) (For S.n. 700100048 And Up)

    M A I N C O N V E Y O R A S S E M B L Y - 4 7 0 4 9 7 3 - S U B A S S E M B L Y 2 ( U S E W / D U A L &...

  • Page 114: Main Conveyor Assembly-4704973 - Detail A (Use W/ Dual & Rh Discharge) (For S.n. 700100048 And Up)

    M A I N C O N V E Y O R A S S E M B L Y - 4 7 0 4 9 7 3 - D E T A I L A ( U S E W / D U A L & R H D I S C H A R G E ) ( F O R S .

  • Page 115: Main Conveyor Assembly-4704973 - Parts List (Use W/ Dual & Rh Discharge) (For S.n. 700100048 And Up)

    M A I N C O N V E Y O R A S S E M B L Y - 4 7 0 4 9 7 3 - P A R T S L I S T ( U S E W / D U A L & R H D I S C H A R G E ) ( F O R S .

  • Page 116: M A I N C O N V E Y O R A S S E M B L Y - 4 7 0 4 5 7 8 - S U B A S S E M B L Y 1

    M A I N C O N V E Y O R A S S E M B L Y - 4 7 0 4 5 7 8 - S U B A S S E M B L Y 1 ( U S E W / L H D I S C H A R G E ) ( F O R S .

  • Page 117: M A I N C O N V E Y O R A S S E M B L Y - 4 7 0 4 5 7 8 - S U B A S S E M B L Y 2

    M A I N C O N V E Y O R A S S E M B L Y - 4 7 0 4 5 7 8 - S U B A S S E M B L Y 2 ( U S E W / L H D I S C H A R G E ) ( F O R S .
  • Page 118 A Tradition of Innovation Since 1966 C M F - 7 0 0 P A R T S R E F E R E N C E...

  • Page 119: Main Conveyor Assembly-4704578 Parts List (For S.n. Up To 700Hj0047)

    M A I N C O N V E Y O R A S S E M B L Y - 4 7 0 4 5 7 8 P A R T S L I S T ( F O R S . N . U P T O 7 0 0 H J 0 0 4 7 ) ITEM PART QTY.

  • Page 120: M A I N C O N V E Y O R A S S E M B L Y - 4 7 0 4 9 7 2 - S U B A S S E M B L Y 1

    M A I N C O N V E Y O R A S S E M B L Y - 4 7 0 4 9 7 2 - S U B A S S E M B L Y 1 ( U S E W / L H D I S C H A R G E ) ( F O R S .

  • Page 121: M A I N C O N V E Y O R A S S E M B L Y - 4 7 0 4 9 7 2 - S U B A S S E M B L Y 2

    M A I N C O N V E Y O R A S S E M B L Y - 4 7 0 4 9 7 2 - S U B A S S E M B L Y 2 ( U S E W / L H D I S C H A R G E ) ( F O R S .

  • Page 122: Main Conveyor Assembly-4704972 - Detail A

    M A I N C O N V E Y O R A S S E M B L Y - 4 7 0 4 9 7 2 - D E T A I L A ( U S E W / L H D I S C H A R G E ) ( F O R S . N . 7 0 0 1 0 0 0 4 8 A N D U P ) C M F - 7 0 0 P A R T S R E F E R E N C E...

  • Page 123: Main Conveyor Assembly-4704972 - Parts List

    M A I N C O N V E Y O R A S S E M B L Y - 4 7 0 4 9 7 2 - P A R T S L I S T ( U S E W / L H D I S C H A R G E ) ( F O R S . N . 7 0 0 1 0 0 0 4 8 A N D U P ) ITEM PART QTY.

  • Page 124: Optional-Lh Dogleg Discharge Conveyor

    O P T I O N A L - L H D O G L E G D I S C H A R G E C O N V E Y O R C M F - 7 0 0 P A R T S R E F E R E N C E...
  • Page 125 O P T I O N A L - L H D O G L E G D I S C H A R G E C O N V E Y O R ITEM PART QTY. PART DESCRIPTION 1000055 SPKT\50\B\12\1\1/4KW 1100271 CHAIN\50DBL\11...

  • Page 126: Optional-Lh Dogleg Discharge Conveyor Details A & B

    O P T I O N A L - L H D O G L E G D I S C H A R G E C O N V E Y O R D E T A I L S A & B C M F - 7 0 0 P A R T S R E F E R E N C E...
  • Page 127 O P T I O N A L - L H D O G L E G D I S C H A R G E C O N V E Y O R D E T A I L S A & B ITEM PART QTY.

  • Page 128: Optional-Lh Dogleg Discharge Conveyor Complete

    O P T I O N A L - L H D O G L E G D I S C H A R G E C O N V E Y O R C O M P L E T E C M F - 7 0 0 P A R T S R E F E R E N C E...
  • Page 129 O P T I O N A L - L H D O G L E G D I S C H A R G E C O N V E Y O R C O M P L E T E ITEM PART QTY.

  • Page 130: Optional-Rh Dogleg Discharge Conveyor

    O P T I O N A L - R H D O G L E G D I S C H A R G E C O N V E Y O R C M F - 7 0 0 P A R T S R E F E R E N C E...
  • Page 131 O P T I O N A L - R H D O G L E G D I S C H A R G E C O N V E Y O R ITEM PART QTY. PART DESCRIPTION 1000055 SPKT\50\B\12\1\1/4KW 1100099 CHAIN\50DBL\CL...

  • Page 132: Optional-Rh Dogleg Discharge Conveyor Detail A

    O P T I O N A L - R H D O G L E G D I S C H A R G E C O N V E Y O R D E T A I L A C M F - 7 0 0 P A R T S R E F E R E N C E...
  • Page 133 O P T I O N A L - R H D O G L E G D I S C H A R G E C O N V E Y O R D E T A I L A ITEM PART QTY.

  • Page 134: Optional-Rh Dogleg Discharge Conveyor Complete

    O P T I O N A L - R H D O G L E G D I S C H A R G E C O N V E Y O R C O M P L E T E C M F - 7 0 0 P A R T S R E F E R E N C E...
  • Page 135 O P T I O N A L - R H D O G L E G D I S C H A R G E C O N V E Y O R C O M P L E T E ITEM PART QTY.

  • Page 136: Magnetic Conveyor Chute Assembly

    M A G N E T I C C O N V E Y O R C H U T E A S S E M B L Y ITEM PART NO. QTY. DESCRIPTION 4704357 CHUTE\MAG\CNVYR\WELD 4800153 BOLT\CRG\5/16X3/4\NC 4900108 NUT\FLG\SERR\5/16\NC 7501271 MAG\PL\14X6X1-1/2 4704355...

  • Page 137: Non-Magnetic Conveyor Chute Assembly

    N O N - M A G N E T I C C O N V E Y O R C H U T E A S S E M B L Y ITEM PART NO. QTY. DESCRIPTION 4704535 CHUTE\NON-MAG\CNVYR\WELD\EXTENSION CNVYR C M F - 7 0 0 P A R T S R E F E R E N C E...

  • Page 138: Non-Magnetic Conveyor End Gate Assembly

    N O N - M A G N E T I C C O N V E Y O R E N D G A T E A S S E M B L Y ITEM PART NO. QTY. DESCRIPTION 4704563 GATE\END\CNVYR 4704594...

  • Page 139: Magnetic Conveyor End Gate Assembly

    M A G N E T I C C O N V E Y O R E N D G A T E A S S E M B L Y ITEM PART NO. QTY. DESCRIPTION 4704565 MAG\END\GATE\CNVYR 4704594 LATCH\GATE\END\CNVYR\L 4704595 LATCH\GATE\END\CNVYR\R 4800153...

  • Page 140: Single Discharge Conveyor Hydraulics

    S I N G L E D I S C H A R G E C O N V E Y O R H Y D R A U L I C S C M F - 7 0 0 P A R T S R E F E R E N C E...

  • Page 141: Conveyor Cylinder Hydraulics

    C O N V E Y O R C Y L I N D E R H Y D R A U L I C S C M F - 7 0 0 P A R T S R E F E R E N C E...

  • Page 142: Pressure Valve Hydraulics

    P R E S S U R E V A L V E H Y D R A U L I C S C M F - 7 0 0 P A R T S R E F E R E N C E...

  • Page 143: Orbit Motor Hydraulics

    O R B I T M O T O R H Y D R A U L I C S C M F - 7 0 0 P A R T S R E F E R E N C E...

  • Page 144: Door Cylinder Hydraulics

    D O O R C Y L I N D E R H Y D R A U L I C S C M F - 7 0 0 P A R T S R E F E R E N C E...

  • Page 145: Single Discharge Conveyor Hydraulics

    S I N G L E D I S C H A R G E C O N V E Y O R H Y D R A U L I C S ITEM PART QTY. PART DESCRIPTION 3700802 HOSE\HYD\3/8X158\> CAP END OF FRONT GATE CYLINDER TO PRESSURE RELIEF VALVE 3700803...
  • Page 146 A Tradition of Innovation Since 1966 C M F - 7 0 0 P A R T S R E F E R E N C E...

  • Page 147: Base Hydraulic Schematic

    B A S E H Y D R A U L I C S C H E M A T I C C M F - 7 0 0 P A R T S R E F E R E N C E...

  • Page 148: Base Hydraulics - Detail A

    B A S E H Y D R A U L I C S - D E T A I L A C M F - 7 0 0 P A R T S R E F E R E N C E...

  • Page 149: Base Hydraulics - Detail B

    B A S E H Y D R A U L I C S - D E T A I L B C M F - 7 0 0 P A R T S R E F E R E N C E...

  • Page 150: Base Hydraulics - Detail C

    B A S E H Y D R A U L I C S - D E T A I L C C M F - 7 0 0 P A R T S R E F E R E N C E...

  • Page 151: Base Hydraulics Parts List

    B A S E H Y D R A U L I C S P A R T S L I S T ITEM PART NO. QTY. DESCRIPTION 3100207 GRBX\PLANETARY\SNGL\1750 3100208 GRBX\PLANETARY\DBL\1750 3700794 HOSE\LUB\1/2X129\> LOWER REAR GEARBOX TO LUBE LINE TEE 3700795 HOSE\LUB\1/2X144\>...

  • Page 152: Orbit Motors 3900025-3900032

    O R B I T M O T O R S 3 9 0 0 0 2 5 - 3 9 0 0 0 3 2 C M F - 7 0 0 P A R T S R E F E R E N C E...
  • Page 153 O R B I T M O T O R S 3 9 0 0 0 2 5 - 3 9 0 0 0 3 2 ITEM PART QTY. PART DESCRIPTION 3900025 MTR\HYD\17.9\H\A;MNT\7/8FOR O-RING THREAD 3900032 MTR\HYD\101-1040\22.6CI O-RING 3900002 MOUNTING FLANGE 6200011 KEY\WDF\1/4X1\#15\808 7501038...

  • Page 154: Hydraulic Cylinder Assembly

    H Y D R A U L I C C Y L I N D E R A S S E M B L Y C M F - 7 0 0 P A R T S R E F E R E N C E...
  • Page 155 H Y D R A U L I C C Y L I N D E R A S S E M B L Y ITEM PART QTY. PART DESCRIPTION 4100226 CYL HYD 2X8\1-1/4RD\WELDED 4100228 CYL\HYD\SEA;KIT\2X8 4100241 CYL\HYD\2X24\1-1/4RD\3000PSI 4100228 SEAL\KIT\2\1-1/4RD\CTD C M F - 7 0 0 P A R T S R E F E R E N C E...

  • Page 156: 3100212 2-Speed Gearbox Assembly

    3 1 0 0 2 1 2 2 - S P E E D G E A R B O X A S S E M B L Y C M F - 7 0 0 P A R T S R E F E R E N C E...
  • Page 157 3 1 0 0 2 1 2 2 - S P E E D G E A R B O X A S S E M B L Y PART NO. DESCRIPTION 3100212 GRBX\2SPD\1.8:1\AP502 3100217 PLUG\SIGHT\AP502\3/8 3100218 PLUG\BRTHR\AP502\1/2 3100382 SEAL\KIT\GRBX\AP502 (INCLUDES 3100362 &...

  • Page 158: 3100225 - 2-Speed Gearbox Assembly

    3 1 0 0 2 2 5 - 2 - S P E E D G E A R B O X A S S E M B L Y C M F - 7 0 0 P A R T S R E F E R E N C E...
  • Page 159 3 1 0 0 2 2 5 - 2 - S P E E D G E A R B O X A S S E M B L Y ITEM PART QTY. PART DESCRIPTION 3100225 GRBX\2SPD\1.84:1\B&P6078 3100412 ORING\STD\3375 3100413 SEAL\OIL\B&P\45X85X10 3100414 SEAL\OIL\B&P\50X90X10...

  • Page 160: (For S.n. Up To 700Hj0028)

    3 1 0 0 2 0 7 S I N G L E P L A N E T A R Y G E A R B O X ( F O R S . N . U P T O 7 0 0 H J 0 0 2 8 ) ITEM PART # DESCRIPTION...

  • Page 161: (For S.n. Up To 700Hj0028)

    3 1 0 0 2 0 8 D O U B L E P L A N E T A R Y G E A R B O X ( F O R S . N . U P T O 7 0 0 H J 0 0 2 8 ) ITEM PART # DESCRIPTION...

  • Page 162: (For S.n. 700Hj0029 And Up)

    3 1 0 0 2 1 5 S I N G L E P L A N E T A R Y G E A R B O X ( F O R S . N . 7 0 0 H J 0 0 2 9 A N D U P ) ITEM PART # DESCRIPTION...

  • Page 163: (For S.n. 700Hj0029 And Up)

    3 1 0 0 2 1 6 D O U B L E P L A N E T A R Y G E A R B O X ( F O R S . N . 7 0 0 H J 0 0 2 9 A N D U P ) ITEM PART # DESCRIPTION...

  • Page 164: Hub Assembly (For S.n. Up To 700Gj0027)

    H U B A S S E M B L Y ( F O R S . N . U P T O 7 0 0 G J 0 0 2 7 ) C M F - 7 0 0 P A R T S R E F E R E N C E...
  • Page 165 H U B A S S E M B L Y ( F O R S . N . U P T O 7 0 0 G J 0 0 2 7 ) ITEM PART QTY. PART DESCRIPTION 2900145 HUB\10-BOLT\11.25”BC 2900146 CAP\DUST\H1010 (DC27) 2900147...

  • Page 166: Hub And Swivel Axle (S.n. 700Hj0028 And Up)

    H U B A N D S W I V E L A X L E ( S . N . 7 0 0 H J 0 0 2 8 A N D U P ) C M F - 7 0 0 P A R T S R E F E R E N C E...
  • Page 167 H U B A N D S W I V E L A X L E ( S . N . 7 0 0 H J 0 0 2 8 A N D U P ) ITEM PART QTY. PART DESCRIPTION 2900146 CAP\DUST\H817 2900149...

  • Page 168: Standard Driveline - 3600530

    S T A N D A R D D R I V E L I N E - 3 6 0 0 5 3 0 1-3/4 - 20 SPLINE ITEM PART NO. DESCRIPTION 3600569 JOINT&SHFT\44E\CV\20SPL 3600570 GUARD\PTO\FRNT\OUTER 3600571 JOINT&TUBE\44E\U\20SPL 3600572 GUARD\PTO\REAR\INNER 3600604 CROSS&BRG\44E\WSLR...

  • Page 169: Standard Driveline - 3600526

    S T A N D A R D D R I V E L I N E - 3 6 0 0 5 2 6 1-3/8 - 21 SPLINE (OPTIONAL) ITEM PART NO. DESCRIPTION 3600577 JOINT&SHAFT\44E\CV\21SPL 3600578 GUARD\PTO\FRNT\OUTER 3600579 JOINT&TUBE\44E\U\20SPL 3600580 GUARD\PTO\REAR\INNER 3600604...

  • Page 170: Standard Driveline - 3600493 (For S.n. Up To 700Gj0027)

    S T A N D A R D D R I V E L I N E - 3 6 0 0 4 9 3 ( F O R S . N . U P T O 7 0 0 G J 0 0 2 7 ) 1-3/4 - 20 SPLINE ITEM PART NO.

  • Page 171: Standard Driveline - 3600551 (For S.n. Up To 700Gj0027)

    S T A N D A R D D R I V E L I N E - 3 6 0 0 5 5 1 ( F O R S . N . U P T O 7 0 0 G J 0 0 2 7 ) 1-3/4 - 20 SPLINE ITEM PART NO.

  • Page 172: 2-Speed Driveline - 3600553

    2 - S P E E D D R I V E L I N E - 3 6 0 0 5 5 3 1-3/4 - 20 SPLINE ITEM PART NO. DESCRIPTION 3600585 JOINT&SHFT\44E\CV\20SPL 3600586 GUARD\PTO\FRNT\OUTER 3600587 JOINT&TUBE\44E\U\20SPL 3600588 GUARD\PTO\REAR\INNER 3600604 CROSS&BRG\44E\WSLR 3600607...

  • Page 173: 2-Speed Driveline - 3600619

    2 - S P E E D D R I V E L I N E - 3 6 0 0 6 1 9 1-3/8 - 21 SPLINE (OPTIONAL) ITEM PART NO. DESCRIPTION 3600604 CROSS&BRG\44E\WSLR 3600607 CROSS&BRG\CAT6\80DEG\CV 3600621 JOINT&TUBE\44E\CV\21SPL 3600622 JOINT&SHAFT\44E\U\20SPL 3600623 GUARD\PTO\FRNT\OUTER...

  • Page 174: 2-Speed Driveline - 3600554 (For S.n. Up To 700Gj0027)

    2 - S P E E D D R I V E L I N E - 3 6 0 0 5 5 4 ( F O R S . N . U P T O 7 0 0 G J 0 0 2 7 ) 1-3/4 - 20 SPLINE ITEM PART NO.

  • Page 175: 2-Speed Driveline - 3600551 (For S.n. Up To 700Gj0027)

    2 - S P E E D D R I V E L I N E - 3 6 0 0 5 5 1 ( F O R S . N . U P T O 7 0 0 G J 0 0 2 7 ) 1-3/4 - 20 SPLINE ITEM PART NO.

  • Page 176: Decals

    D E C A L S CMF-700 C M F - 7 0 0 P A R T S R E F E R E N C E...
  • Page 177 D E C A L S ITEM PART QTY. PART DESCRIPTION 6500020 DECAL\LOGO\HYBSTR\SNBRS\3 6500039 DECAL\INFO\S/N\DURATECH 6500085 DECAL\DNGR\ROTATING;DR-LNE 6500208 DECAL\WARN\GENERAL 6500220 DECAL\WARN\HI;PRESS;FLUID 6500253 DECAL\INFO\FLUID;LEVEL\ 6500302 7’-6” DECAL\LOGO\STRIP\3\RD&BLK 6500304 DECAL\LOGO\HYBSTR\1-3/4\W/ 6500339 DECAL\WARN\PINCH;POINT 6500366 DECAL\SMV 6500376 1’-6” DECAL\MISC\TAPE\RED 6500377 4’-6” DECAL\MISC\TAPE\AMBER 6500383 DECAL\WARN\AUGER\MIXER 6500384 DECAL\LOGO\CMF700 6500391...

  • Page 178: Decal Locations

    D E C A L L O C A T I O N S 6500020 6500383 6500208 6500339 (4 LOCATIONS) 6500339 (4 LOCATIONS) C M F - 7 0 0 P A R T S R E F E R E N C E...
  • Page 179 D E C A L L O C A T I O N S 6500208 6500490 6500220 6500085 C M F - 7 0 0 P A R T S R E F E R E N C E...

  • Page 180: Cmf Tail Lights Wiring Schematic

    C M F T A I L L I G H T S W I R I N G S C H E M A T I C C M F - 7 0 0 P A R T S R E F E R E N C E...

  • Page 181: Truck Mount Parts Reference Supplement

    CMF-700 VERTICAL MIXER S.N. 700HJ0002TRK AND UP Truck Mount Supplement Parts Reference C M F - 7 0 0 P A R T S R E F E R E N C E...

  • Page 182: Truck Mount Frame Assembly - Front

    T R U C K M O U N T F R A M E A S S E M B L Y - F R O N T C M F - 7 0 0 P A R T S R E F E R E N C E...
  • Page 183 T R U C K M O U N T F R A M E A S S E M B L Y - F R O N T ITEM PART QTY. PART DESCRIPTION 4000340 VLV\MANIFOLD\ASSY\CMFTRCK 4000402 VLV\HYD\RELIEF\DUAL_FLUSH 4000422 VLV\BLOCK\SHIFT\2SPD\3GPM 4200132 PUMP\HYD\1.87CU.IN.\LH\26013\LZA 4200133...

  • Page 184: Truck Mount Frame Assembly - Rear

    T R U C K M O U N T F R A M E A S S E M B L Y - R E A R C M F - 7 0 0 P A R T S R E F E R E N C E...
  • Page 185 T R U C K M O U N T F R A M E A S S E M B L Y - R E A R ITEM PART QTY. PART DESCRIPTION 4000340 VLV\MANIFOLD\ASSY\CMFTRCK 4000402 VLV\HYD\RELIEF\DUAL_FLUSH 4000422 VLV\BLOCK\SHIFT\2SPD\3GPM 4200132 PUMP\HYD\1.87CU.IN.\LH\26013\LZA 4200133 RAD\HYD\DCS30\12V\W/BYPASS...

  • Page 186: Truck Mount Frame Assembly - Detail A

    T R U C K M O U N T F R A M E A S S E M B L Y - D E T A I L A C M F - 7 0 0 P A R T S R E F E R E N C E...
  • Page 187 T R U C K M O U N T F R A M E A S S E M B L Y - D E T A I L A ITEM PART QTY. PART DESCRIPTION 4000340 VLV\MANIFOLD\ASSY\CMFTRCK 4000402 VLV\HYD\RELIEF\DUAL_FLUSH 4000422 VLV\BLOCK\SHIFT\2SPD\3GPM 4200132...

  • Page 188: Truck Mount Tub Assembly

    T R U C K M O U N T T U B A S S E M B L Y C M F - 7 0 0 P A R T S R E F E R E N C E...
  • Page 189 T R U C K M O U N T T U B A S S E M B L Y ITEM PART QTY. PART DESCRIPTION 3900046 MTR\HYD\256.2CID\RAD_PIST 4100030 PIN 1” X 3-1/2” HYD. CYL. 4704160 TUB\WELD\CMF700 4704161 DOOR\CNVYR\ASSY 4704181 PIN\LOCK\3/4X2-1/2 4704312 BELT\12”\EXT\TMR...

  • Page 190: Truck Mount - Tub Liner

    T R U C K M O U N T - T U B L I N E R C M F - 7 0 0 P A R T S R E F E R E N C E...
  • Page 191 T R U C K M O U N T - T U B L I N E R ITEM PART QTY. PART DESCRIPTION 4704599 LINER\FRNT\RGHT\CMF700 4704600 LINER\FRNT\LFT\CMF700 4704851 LINER\REAR\LFT\CMF700 4704852 LINER\REAR\RGHT\CMF700 4704853 LINER\ANGLES\CMF700 4704957 LINER\SIDE\W/CUT\CMF700 4704959 LINER\SIDE\CMF700 C M F - 7 0 0 P A R T S R E F E R E N C E...

  • Page 192: Truck Mount - Auger Assembly

    T R U C K M O U N T - A U G E R A S S E M B L Y C M F - 7 0 0 P A R T S R E F E R E N C E...
  • Page 193 T R U C K M O U N T - A U G E R A S S E M B L Y ITEM PART QTY. PART DESCRIPTION 4704865 AUGER\WELD\CMF_TRUCK 4704884 COVER\AUGER 4800098 BOLT\HEX\3/8X1-1/4\NC 4800659 SCR\BUT\ALN\5/8X2\NC 4900110 NUT\FLG\SERR\5/8\NC 5000019 WASH\LOCK\3/8 7501161 BLADE\CMF\STANDARD...

  • Page 194: T R U C K M O U N T M A I N C O N V E Y O R A S S E M B L Y - 4 7 0 4 8 6 0 - V I E W 1

    T R U C K M O U N T M A I N C O N V E Y O R A S S E M B L Y - 4 7 0 4 8 6 0 - V I E W 1 ( F O R S .
  • Page 195 T R U C K M O U N T M A I N C O N V E Y O R A S S E M B L Y - 4 7 0 4 8 6 0 - V I E W 2 ( F O R S .

  • Page 196: Truck Mount Main Conveyor Assembly - 4704860 - Detail A (For S.n. Up To 700Hj004Trk)

    T R U C K M O U N T M A I N C O N V E Y O R A S S E M B L Y - 4 7 0 4 8 6 0 - D E T A I L A ( F O R S .
  • Page 197 T R U C K M O U N T M A I N C O N V E Y O R A S S E M B L Y - 4 7 0 4 8 6 0 - P A R T S L I S T ( F O R S .

  • Page 198: T R U C K M O U N T M A I N C O N V E Y O R A S S E M B L Y - 4 7 0 4 9 7 4 - V I E W 1

    T R U C K M O U N T M A I N C O N V E Y O R A S S E M B L Y - 4 7 0 4 9 7 4 - V I E W 1 ( F O R S .
  • Page 199 T R U C K M O U N T M A I N C O N V E Y O R A S S E M B L Y - 4 7 0 4 9 7 4 - V I E W 2 ( F O R S .

  • Page 200: Truck Mount Main Conveyor Assembly - 4704974 - Detail A (For S.n. 70010005 And Up)

    T R U C K M O U N T M A I N C O N V E Y O R A S S E M B L Y - 4 7 0 4 9 7 4 - D E T A I L A ( F O R S .
  • Page 201 T R U C K M O U N T M A I N C O N V E Y O R A S S E M B L Y - 4 7 0 4 9 7 4 - P A R T S L I S T ( F O R S .

  • Page 202: Rear Bumper Assembly

    R E A R B U M P E R A S S E M B L Y C M F - 7 0 0 P A R T S R E F E R E N C E...
  • Page 203 R E A R B U M P E R A S S E M B L Y ITEM PART QTY. PART DESCRIPTION 4704392 BMPR\TRUCK\CMF\WELD 4704394 COVER\LIGHTS\BMPR\R 4704395 COVER\LIGHTS\BMPR\L 4704396 COVER\LIGHTS\BMPR\M 4800082 BOLT\HEX\1/2X1-1/2 4800643 BOLT\HEX\5/16X3/4 4900001 NUT\HEX\1/2\NC 4900108 NUT\FLG\SERR\5/16\NC 5000006 WASH\LOCK\1/2 5700199 LAMP\TAIL\12VDC\4-1/2RD...

  • Page 204: Truck Mount Driveline - 3600534

    T R U C K M O U N T D R I V E L I N E - 3 6 0 0 5 3 4 ITEM PART NO. DESCRIPTION 3600534 PTO\252-23099\44E\PUMP 3600604 CROSS&BRG\44E\WSLR 3600617 YOKE\44E\1.51”-23SPLINE 3600722 YOKE&SHAFT\44E\23SPL 3600723 YOKE&SHAFT&SLEEVE\44E\ 3600724 YOKE\44E\FLG\ADPTR...

  • Page 205: Truck Mount Hydraulics

    T R U C K M O U N T H Y D R A U L I C S C M F - 7 0 0 P A R T S R E F E R E N C E...

  • Page 206: Hydraulic Motors

    H Y D R A U L I C M O T O R S C M F - 7 0 0 P A R T S R E F E R E N C E...
  • Page 207 H Y D R A U L I C M O T O R S ITEM PART QTY. PART DESCRIPTION 3800484 FTG\3/4FJICSX3/4MJICX3/4MJIC\RUN;TEE 3800826 FTG\3/4FJICX1/2SHLCK 3800864 FTG\7/8FJICX1/2SHLCK 3800916 CLMP\FLANGE\SPLIT\#62\-16 3800918 FTG\8MORRX16MJIC\ST 3800919 FTG\10MORRX22MJIC\ST 3900046 MTR\HYD\256.2CID\RAD_PIST 3800915 FTG\MJICXFJICXMJIC\BR;TEE 3700856 HOSE\HYD\3/8X27> SHIFT BLOCK “1” TO #1 MOTOR “Y” 3700875 HOSE\HYD\3/4X34>...

  • Page 208: Shift Block

    S H I F T B L O C K C M F - 7 0 0 P A R T S R E F E R E N C E...
  • Page 209 S H I F T B L O C K ITEM PART QTY. PART DESCRIPTION 3800631 FTG\9/16MORX9/16MJIC\ST 3800757 FTG\9/16MORX9/16MJIC\90 3800766 FTG\3/4MJICX3/4MJICX3/4MJIC\TEE 3800816 FTG\9/16MORX3/4MJIC\90 3800826 FTG\3/4FJICX1/2SHLCK 3800864 FTG\7/8FJICX1/2SHLCK 4200140 VALVE\2POS\3WAY\3GPM\12V\ECOIL 3700855 HOSE\3/8X252> SHIFT BLOCK “3” TO PUMP #1 FILTER HEAD 3700856 HOSE\HYD\3/8X27>...

  • Page 210: Flush/Loop Block

    F L U S H / L O O P B L O C K C M F - 7 0 0 P A R T S R E F E R E N C E...
  • Page 211 F L U S H / L O O P B L O C K ITEM PART QTY. PART DESCRIPTION 3800710 FTG\1-5/16MORX1-5/8MJIC\ST 3800757 FTG\9/16MORX9/16MJIC\90 3800811 CLMP\FLANGE\SPLIT\#62\-16 3800917 FTG\9/16FJIC\CPLR\TEST 4000402 VLV\HYD\RELIEF\DUAL_FLUSH 3700872 HOSE\HYD\1-1/4X79> LOOP FLUSH BLOCK “T” TO LOOP FLUSH RET TEE 3700875 HOSE\HYD\3/4X34>...

  • Page 212: Hydraulic Tank

    H Y D R A U L I C T A N K C M F - 7 0 0 P A R T S R E F E R E N C E...
  • Page 213 H Y D R A U L I C T A N K ITEM PART QTY. PART DESCRIPTION 3800471 FTG\1-5/8MJICX1-1/4MP\ST\SOLID 3800537 FTG\3/4MORX3/4MJIC\90 3800741 FTG\1-5/8MORX1-5/8MJIC\90 3800766 FTG\3/4MJICX3/4MJICX3/4MJIC\TEE 3800826 FTG\3/4FJICX1/2SHLCK 3800901 FTG\3/8MPX(2).125”CORDGRIPS\NYLON 3800914 FTG\1-1/16MJICX1-1/4MP\ST\SOLID 4400007 FLTR\SCRN\2MPX1-1/4FP\25GPM 4704868 PLUG\SENSOR\TEMP\LEVEL 4704887 TANK\OIL\ASSY\CMF_TRUCK 4704888 TUBE\DROP\SENSOR\TEMP/LEVEL\CMF 5700660 SWITCH\TEMP/LEVEL\185DEG 3800103...

  • Page 214: Hydraulic Radiator

    H Y D R A U L I C R A D I A T O R C M F - 7 0 0 P A R T S R E F E R E N C E...
  • Page 215 H Y D R A U L I C R A D I A T O R ITEM PART QTY. PART DESCRIPTION 3800470 FTG\1-5/8MORX1-5/8MJIC\ST 3800913 FTG\1-5/8MJICX1-5/8MJICX1-5/8MJIC 4200133 RAD\HYD\DCS30\12V\W/BYPASS 3700873 HOSE\HYD\1-1/4X71> LOOP FLUSH BLOCK RET TEE TO BYPASS SIDE OF COOLER 3700874 HOSE\HYD\1-1/4X38>...

  • Page 216: Auxiliary Valve

    A U X I L I A R Y V A L V E C M F - 7 0 0 P A R T S R E F E R E N C E...
  • Page 217 A U X I L I A R Y V A L V E ITEM PART QTY. PART DESCRIPTION 3800279 FTG\1-1/16MORX1-1/16MJIC\90 3800477 FTG\3/4MORX3/4MJIC\ST 3800537 FTG\3/4MORX3/4MJIC\90 3800546 FTG\3/4MJICX3/4FJIC\90\SW 3800826 FTG\3/4FJICX1/2SHLCK 3800864 FTG\7/8FJICX1/2SHLCK 3800915 FTG\7/8MOR\7/8\MJIC\45 4000340 VLV\AUX\ASSY\CMFTRCK 3700865 HOSE\HYD\5/8X177> GEAR PRESSURE PUMP TO AUX VALVE “P” 3700867 HOSE\HYD\3/4X97>...

  • Page 218: Auxiliary Valve

    A U X I L I A R Y V A L V E C M F - 7 0 0 P A R T S R E F E R E N C E...
  • Page 219 A U X I L I A R Y V A L V E ITEM PART QTY. PART DESCRIPTION 3800328 FTG\7/8MORX3/4MJIC\ADPT 3800631 FTG\9/16MORX9/16MJIC\ST 4000340 VLV\AUX\ASSY\CMFTRCK 4700776 CLMP\HOSE\3/8 3700864 HOSE\HYD\1/2X101> BOTTOM PORT OF CONVEYOR EXTENSION MOTOR 3700858 HOSE\HYD\3/8X24 AUX VALVE “C1” TO TUBE END EXTENSION CYLINDER 3700859 HOSE\HYD\3/8X31 AUX VALVE “C2”...

  • Page 220: Door And Conveyor Cylinders

    D O O R A N D C O N V E Y O R C Y L I N D E R S C M F - 7 0 0 P A R T S R E F E R E N C E...
  • Page 221 D O O R A N D C O N V E Y O R C Y L I N D E R S ITEM PART QTY. PART DESCRIPTION 3800530 FTG\3/4MORX9/16MJIC\ST 4700776 CLMP\HOSE\3/8 4100226 CYL\HYD\2X8\1-1/4RD\WELDE 4100241 CYL\HYD\2”X24”\1-1/4”ROD 3700858 HOSE\HYD\3/8X24 AUX VALVE “C1” TO TUBE END OF CONVEYOR EXTENSION CYLINDER 3700859 HOSE\HYD\3/8X31 AUX VALVE “C2”...

  • Page 222: Conveyor Motors

    C O N V E Y O R M O T O R S C M F - 7 0 0 P A R T S R E F E R E N C E...
  • Page 223 C O N V E Y O R M O T O R S ITEM PART QTY. PART DESCRIPTION 3800328 FTG\7/8MORX3/4MJIC\ADPT 3900025 MOTOR\HYD\17.9\H\AMNT\7/8FOR\1SHFT 3900032 MOTOR\HYD\22.6\H\AMNT\7/8FOR\1SHFT 3700864 HOSE\HYD\1/2X101> BOTTOM PORT EXTENSION MOTOR TO AUX VALVE “M2” 3700862 HOSE\HYD\1/2X96> AUX VALVE “M1” TO TOP PORT CONVEYOR MOTOR 3700863 HOSE\HYD\1/2X28>...

  • Page 224: Hydro Pumps

    H Y D R O P U M P S C M F - 7 0 0 P A R T S R E F E R E N C E...
  • Page 225 H Y D R O P U M P S ITEM PART QTY. PART DESCRIPTION 3800277 FTG\1-1/16MORX1-1/16MJIC\ST 3800294 FTG\1-5/16MORX1-1/16MJIC\ST 3800497 FTG\1-5/16FJICX1-5/16MJICX1-5/16MJIC\RUN;TEE 3800710 FTG\1-5/16MORX1-5/8MJIC\ST 3800757 FTG\9/16MORX9/16MJIC\90 3800811 CLMP\FLANGE\SPLIT\#62\-16 3800917 FTG\9/16FJIC\CPLR\TEST 4200130 PUMP\HYD\4.6\HYDRO\FRNT 4200131 PUMP\HYD\4.6\HYDRO\REAR 3700855 HOSE\3/8X252> SHIFT BLOCK “3” TO HYDRO PUMP #1 FILTER HEAD 3700866 HOSE\HYD\3/4X27>...

  • Page 226: Gear Pump

    G E A R P U M P C M F - 7 0 0 P A R T S R E F E R E N C E...
  • Page 227 G E A R P U M P ITEM PART QTY. PART DESCRIPTION 3800448 FTG\7/8MORX7/8MJIC\ST 3800710 FTG\1-5/16MORX1-5/8MJIC\ST 4200132 PUMP\HYD\1.87CU.IN.\LH\26013\LZA 4200130 PUMP\HYD\4.6\HYDRO\FRNT 4200131 PUMP\HYD\4.6\HYDRO\FRNT 3700865 HOSE\HYD\5/8X177> GEAR PUMP PRESSURE TO AUX VALVE “P” 3700868 HOSE\HYD\1-1/4X186> GEAR PUMP SUCTION TO PASSENGER SIDE OF HYDRAULIC TANK C M F - 7 0 0 P A R T S R E F E R E N C E...

  • Page 228: Truck Mount Main Wiring Harness

    C M F - 7 0 0 T R U C K M O U N T M A I N W I R I N G H A R N E S S C M F - 7 0 0 P A R T S R E F E R E N C E...

  • Page 229: Truck Mount Main Wiring Schematic

    C M F - 7 0 0 T R U C K M O U N T M A I N W I R I N G S C H E M A T I C C M F - 7 0 0 P A R T S R E F E R E N C E...
  • Page 230 A Tradition of Innovation Since 1966 C M F - 7 0 0 P A R T S R E F E R E N C E...

  • Page 231: Documentation Comment Form

    CMF-700 Documentation Comment Form DuraTech Industries welcomes your comments and suggestions regarding the quality and usefulness of this manual. Your comments help us improve the documentation to better meet your needs. • Did you find any errors? • Is the information clearly presented? • Does the manual give you all the information you need to operate the equipment safely and effectively? • Are the diagrams and illustrations correct? • Do you need more illustrations?
  • Page 232 Please fill out the delivery report on the following pages. The white copy is to be returned to: DuraTech Industries International Inc. P.O. Box 1940 Jamestown, ND 58402-1940 The yellow copy is the dealer copy; the pink copy is to be retained by the customer.

  • Page 233: Truck Mount Hydraulic Schematic

    C M F - 7 0 0 T R U C K M O U N T H Y D R A U L I C S C H E M A T I C C M F - 7 0 0 W / T R U C K M O U N T S U P P L E M E N T P A R T S R E F E R E N C E FO-1...

Table of Contents