Table of Contents
Advertisement
Initializing
If you become unable to connect to the UB-E04, you can use the following procedure to initialize
settings and restore the device to factory default.
1
Turn off the printer's power.
2
With the push button pressed, turn on the printer's power.
Press the push button with a thin object such as a tweezers.
3
Continue to hold the push button until the initialization start message below is
printed (approx. 10 seconds).
Do not turn the printer's power off until initialization is complete.
After about 20 seconds, a message notifying the completion of the reset is printed.
After the completion message, a status sheet is printed.
22
Push button
Advertisement
Table of Contents
