Subscribe to Our Youtube Channel
Related Manuals for Wyse Z90DW
Summary of Contents for Wyse Z90DW
- Page 1 Installation Guide Wyse Z Class 2 and 4-GB RAM Upgrade Option Kit ® Products: Z90DW, Z90SW, Z90D7, Z90S7 Issue: 122211 PN: 883884-32L Rev. A...
- Page 2 End User License Agreement (“License”) A copy of the Wyse Technology End User License Agreement is included in the software and provided for your reference only. The License at http://www.wyse.com/license as of the purchase date is the controlling licensing agreement.
-
Page 3: Table Of Contents
Contents Introduction Kit Contents 1 Kit Warranty 1 Wyse Technical Support 2 Related Documentation and Services 2 Wyse Online Community 2 Installing Z Class RAM Requirements 3 Procedures 3... - Page 4 Contents This page intentionally blank.
-
Page 5: Introduction
Introduction This guide provides step-by-step instructions to upgrade the RAM in the following Wyse Z class mobile thin clients: • Z90DW • Z90SW • Z90D7 • Z90S7 Kit Contents The kit includes a RAM module. Kit Warranty The warranty on this kit assumes the remaining months of warranty of the thin client in which it is installed, or for 90 days, whichever is greater. -
Page 6: Wyse Technical Support
To access international support, visit http://www.wyse.com/global. Related Documentation and Services Fact Sheets containing the features of hardware products are available on the Wyse Web site. Go to http://www.wyse.com/products/hardware, click the link for your hardware product, and then click the link for the Fact Sheet. -
Page 7: Installing Z Class Ram
Installing Z Class RAM This chapter contains information for users of Wyse Z class thin clients who must install new RAM. Requirements • Small Phillips screwdriver Warning RAM modules may be susceptible to damage by Electro-Static Discharge (ESD). All industry-standard cautions should be followed to avoid ESD. - Page 8 Chapter 2 Figure 1 Removing the cover screws 4. Place your thumbs on the top surface above where the end screws were removed. With a continuous motion, push firmly downward and towards the back panel (pushing down unlatches the hooks under the cover). The cover will shift approximate 1/4 inch to hang over the back panel, as shown in Figure 2.
- Page 9 Installing Z Class RAM Figure 3 Removing the cover 6. Remove the cover to expose the RAM module, as shown in Figure 4. Figure 4 Inserting RAM module Warning RAM modules may be susceptible to damage by Electro-Static Discharge (ESD). All industry-standard cautions should be followed to avoid ESD. Before you remove or install a module, touch any metal part of the chassis and keep that contact with the chassis during the installation process.
- Page 10 12.After the thin client reboots, you can verify that your general client information (for example, the Client Information or System Information dialog box information) is correct. After verification, the thin client is ready for operation and setup by an administrator. Administrator and other documentation for your thin client model are available at: http://www.wyse.com/manuals.
- Page 11 Installing Z Class RAM This page intentionally blank.
- Page 12 Installation Guide ® Wyse Z Class 2 and 4-GB RAM Upgrade Option Kit Issue: 122211 Written and published by: Wyse Technology Inc., December 2011 ® ® Created using FrameMaker and Acrobat...
Need help?
Do you have a question about the Z90DW and is the answer not in the manual?
Questions and answers