Table of Contents
Advertisement
6
Chapter 2
13.Attach the cover screws in the reverse order as described in step 3.
14.Connect the power cord and power adapter, attach any other cables to the thin client,
15.After the thin client reboots, you can verify that your general client information (the
attach the vertical foot, and then press the power button to turn on the thin client.
Client Information dialog box information) is correct (that the new RAM is correctly
recognized by the system—you will see an increase relative to your previous amount
and system usage). After verification, the thin client is ready for operation and setup by
an administrator.
TIP: Administrator and other documentation for your thin client model are available at:
http://www.wyse.com/manuals.
Advertisement
Table of Contents
