Mooer Micro Series Owner's Manual

Channel Switch Pedal
Main Features
Ÿ Micro ABY can be used in two ways, the signal path can flow from
A/B to Y, or from Y to A/B
Can work without power supply (LED will not be lit up)
Ÿ
Ÿ Full metal shell
Ÿ Very small and exquisite
Ÿ True bypass DC 9V Adapter power supply
Basic Using
Micro ABY can be used in two ways, Here are two application examples:
Example Y→A/B
Y(Instrument)→ Effects chain A/Effects chain B
Example A/B→Y
Effects chain A/Effects chain B→Y(Amplifier)
3
6
Y
4
A
Channel A: Red
Channel B: Green
5
B
A/B/Y Jack: 1/4 monaural jack "
Power Requirements: AC adapter 9V DC (center minus plug), can
work with out power (LED doesn't work)
Dimensions: 93.5mm (D) × 42mm (W) × 52mm (H)
Weight:160g
Accessories: Owner's Manual
*
Disclaimer: Any specification's update won't be amended in this manual.
1. Channel Select Footswitch
Push down the footswitch to
switch between channel A and
channel B.
2. A/B LED:
Instructs channel A or channel
B of Micro ABY, channel A
corresponding to the red LED
and channel B corresponding to
the green LED, LED won't be lit
up without power supply.
3. DC IN Power Jack:
For power supply, use a 9-volt
DC regulated AC adapter(plug
polarity is positive on the barrel
and negative in the center).
4. A Jack:
1/4" mono audio jack, for
connecting instruments.
5. B Jack:
1/4" mono audio jack, for
connecting instruments.
6. Y Jack:
1/4" mono audio jack, for
connecting instruments.
: