System Configuration - Huawei ME60 Hardware Description

HUAWEI ME60 Multiservice Control Gateway
Hardware Description
Table 2-1
Table 2-1 Board distribution in the board cage of the ME60-X16
Slot
Number
1 to 16
17 to 18
19 to 22

2.1.6 System Configuration

This section describes the system configuration and physical parameters of the ME60-X16.
Table 2-2 System configuration list of the ME60-X16
Item
Processing unit
BootROM
SDRAM
NVRAM
Flash
Issue 02 (2012-11-15)
NOTE
Slot number:On the ME60-X16, the slots of LPUs are numbered from 1 to 16. The slot number increases
from left to right and from top to bottom, facing the front panel of the ME60 (there are corresponding marks
on the panel).
Card number:
l Upper chassis
l The cards of LPUs are numbered from top to bottom and from right to left beginning with 0.If
there is no card on a board, the card number is set to 0.
l Lower chassis
l The cards of LPUs are numbered from bottom to top and from left to right beginning with 0. If
there is no card on a board, the card number is set to 0.
Port number:
l Upper chassis
l The ports of LPUs are numbered from left to right and from top to bottom beginning with 0.
l Lower chassis
l The ports of LPUs are numbered from right to left and from bottom to top beginning with 0.
describes the slot layout on the ME60-X16.
Quant Slot Width
ity
16 41 mm (1.6 inches)
2 41 mm (1.6 inches)
4 41 mm (1.6 inches)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Remarks
These slots are used to hold LPUs.
These slots hold MPUs that work in 1:1
backup mode.
These slots are used to hold SFUs that work
in 3+1 load balancing mode.
Description
Main frequency: 1.5 GHz
8 MB
2 GB
4 MB
32 MB
2 ME60-X16 Chassis Overview
Remarks
-
-
Can be extended to 4 GB.
-
-
9