Page 1
USER MANUAL Beijing Hua Xin Liu He Investment (Australia) Pty Ltd. Perth Office Brisbane Office 32 Cr ockford Street 789 Wellington Street, West Banyo, QLD 4014 Perth, WA 6005, Australia Phone: (08) 6311 9906 Phone: (07)31236148 Phone: (07) 31236148 Fax: (07) 32664758 Email: perth@zeusappollosolar.com.au Email: bris@zeusappollosolar.com.au...
Page 3
The inverter can exclude the possibility of DC residual currents to 6mA in the system, Where an external RCD is required in addition to the built-in RCMU, type A RCD must be used to avoid tripping。 The PV- is not grounded as default configuration. in after Zeus Appollo Solar 1-3K 3-5KD Single-MPPT...
Page 4
Single-MPPT series Dual-MPPT series accessory bag. Single-MPPT series referred to Figure 3.3.2-4, Figure 3.3.2-5. Dual-MPPT series referred to Figure 3.3.2-6, Figure3.3.2-7. 1-3k .and 2 pairs of DC connectors in 3-5k. 。...
Page 6
3.4.3-2. please install an independent two Z20I1K/Z20I1K5/Z20I2K/Z20I2K5 Z20I3K/Z20I3KD/Z20I3K6D Z20I4K2D/Z20I4K6D/Z20I5KD forbidden Single-MPPT Dual-MPPT series...
Page 7
3.4.4-1 inverter, shall not use it for any other purposes.
Page 8
www.z20monitoring.zeusappollo.com to create PV station.
Page 9
Single-MPPT series display only one pair Vpv and Ipv Z20IXXXD The inverters must be programmed with the Safety Country of Australia prior to connecting to the grid.
Page 11
Zeus Appollo Solar Z20I1K Z20I1K5 Z20I2K Z20I2K5 Z20I3K...
Page 12
Z20I1K Z20I1K5 Z20I2K Z20I2K5 Z20I3K Z20I1K Z20I1K5 Z20I2K Z20I2K5 Z20I3K Technical Data Z20I3KD Z20I3K6D Z20I4K2D Z20I5KD PV String Input Data 3990 4788 5586 6650 Max.DC Input Power(W) Max.DC Input voltage(V) 80~550 80~550 80~550 80~550 Start-up MPPT Range for Full Load (V)
Page 13
Z20I3KD Z20I3K6D Z20I4K2D Z20I5KD Technical Data Anti-islanding Protection Integrated (AFD) Input Reverse Polarity Protection Insulation Resistor Detection Residual Current Monitoring Unit Output Over Current Protection Output Short Protection Output Over Voltage Protection Examples Operating Temperature Range( ℃ Storage Temperature ( -30~65 ℃...
Need help?
Do you have a question about the Z20I1K and is the answer not in the manual?
Questions and answers