Mobile dust extractor CT 26 E, CT 36 E
4
Safety instructions
Warning! Read and observe all informa
tion and safety instructions. Ignoring warning
notes and instructions may lead to electric
shocks, fires and/or cause serious injury.
Keep all safety information and other instruc
tions in a safe place for future reference.
–
This device can be used by persons with re
duced physical, sensory or mental abilities
or those who lack experience or knowl
edge, if they are supervised or have been
instructed on safe use of the device and un
derstand the resulting dangers. Children
should always be supervised to ensure that
they do not play with the machine.
Warning: machine may contain hazardous
–
dust. Only authorised qualified specialists
with suitable protective equipment may
perform maintenance, empty the container
and change the filter.
–
Always operate with the filter system in
stalled!
–
Always use suitable protective equipment!
–
If intact following a visual inspection, work
in a dry environment according to instruc
tions!
–
Risk of explosion and fire hazard: do not
extract sparks or hot dust, flammable or
explosive dust (e.g. magnesium, alumini
um, petrol, thinner, with the exception of
wood), aggressive fluids/solids (e.g. acid,
leach, solvent).
–
Observe all national safety regulations as
well as the material manufacturer's speci
fications!
–
Always use the socket on the machine for
the purpose specified!
–
Do not lift or transport using a crane hook
or lifting gear!
5
Functional description
[1-1]
Intake opening
[1-2]
Module slot
[1-3]
Appliance socket
[1-4]
Electrical outlet module circuit
breaker
CT 36 E, CT 36 LE
CT 48 E
[1-5]
Hose store
[1-6]
Handle
[1-7]
SysDoc
[1-8]
Switch
[1-9]
Suction power adjuster
[1-10] Locking clip
[1-11] Dust container
[1-12] Brake
[1-13] Lever
6
Operation
WARNING
Unauthorised voltage or frequency!
Risk of accident
► The mains voltage and the frequency of the
power source must correspond with the
specifications on the machine's name
plate.
► In North America, only Festool machines
with the voltage specifications 120 V/60 Hz
may be used.
6.1
Initial operation
► Open the locking clips [2-2] and remove the
top section of the machine [2-1].
► Remove the accessories from the dust con
tainer [2-3] and the packaging!
► Insert a filter bag in the dust container (see
chapter
9.1
).
► Replace the top section [2-1] and close the
locking clips [2-2].
► Attach the cable holder to the rear of the
mobile dust extractor (see Fig. [3]).
► Connect the suction hose to the machine.
6.2
Switch on/off
► Insert the plug into an earthed socket.
English
14,4 kg
18,8 kg
7