Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Farmet STRIP-TILL ST4N
Summary of Contents for Farmet STRIP-TILL ST4N
- Page 1 OPERATING MANUAL STRIP-TILL ST4N ST6NS ST8NS Edition: 3 | effective from: 01. 08. 2021 IČ: Farmet a. s. telefon: +420 491 450 111 46504931 web: www.farmet.cz Jiřinková 276 DIČ: CZ46504931 fax: +420 491 450 136 e-mail: farmet@farmet.cz 552 03 Česká Skalice, CZ...
- Page 2 STRIP-TILL ST4N | ST6NS | ST8NS Dear customer, Carried cultivators STRIP-TILL are quality products of Farmet a.s. Ceska Skalice. You can fully utilise the advantages of your machine after thoroughly studying the operating manual. The serial number of the machine is punched on the production label and written in the operating manual (see Table 1).
-
Page 3: Table Of Contents
Manual STRIP-TILL ST4N | ST6NS | ST8NS TABLE OF CONTENTS Machine limit parameters ......................4 Technical parameters ......................4 Safety statement ........................4 A. GENERAL INSTRUCTIONS FOR USE ..................5 B. MACHINE TRANSPORT USING TRANSPORT MEANS ............6 C. MACHINE HANDLING USING LIFTING EQUIPMENT ............6 D. -
Page 4: Machine Limit Parameters
Manual STRIP-TILL ST4N | ST6NS | ST8NS MACHINE LIMIT PARAMETERS The machine is designed for soil cultivation up to a depth of 35 cm when agricultural soil cultivation. Another type of use exceeding the determined purpose is forbidden. ... -
Page 5: General Instructions For Use
Manual STRIP-TILL ST4N | ST6NS | ST8NS A. GENERAL INSTRUCTIONS FOR USE The machine is made in accordance with the latest equipment state and approved safety regulations. However, dangers of user or third person injury or machine damage or creation of other material damage may arise during use. -
Page 6: Machine Transport Using Transport Means
Manual STRIP-TILL ST4N | ST6NS | ST8NS B. MACHINE TRANSPORT USING TRANSPORT MEANS The transport means designed for machine transport must have the load capacity minimally identical with the weight of the transported machine. The total weight of the machine is stated on the production label. - Page 7 Manual STRIP-TILL ST4N | ST6NS | ST8NS Travelling and transport on the machine P 37 H structure is strictly forbidden. When connecting or disconnecting, do not step between the tractor and the P 2 H machine, also do not enter this space, if the tractor and the machine are not at rest and the engine is not turned off.
-
Page 8: Description
Manual STRIP-TILL ST4N | ST6NS | ST8NS 1. DESCRIPTION STRIP TILL is designed as a mounted machine, equipped with the TBZ 3 hitch. The machine consists of a central frame and two folding side frames where the working units are mounted, consisting of front cutting discs, crop residue spreaders, loosening ploughshares and packing discs. -
Page 9: Machine Assembly At The Customer
Manual STRIP-TILL ST4N | ST6NS | ST8NS 1.1.5 Crop residue spreaders 1.1.6 Ploughshares for loosening with a fertilizer outlet 1.1.7 Side packing discs 1.1.8 Fertilizer or manure distribution – optional equipment for extra charge 2. MACHINE ASSEMBLY AT THE CUSTOMER ... -
Page 10: Aggregation To A Tractor
Manual STRIP-TILL ST4N | ST6NS | ST8NS 3.1 AGGREGATION TO A TRACTOR The machine can be connected only to a tractor, whose curb weight is identical or higher than the overall weight of the connected machine. The machine operator must observe all generally valid regulations of work safety, health protection, fire ... -
Page 11: Hydarulics Connection
Manual STRIP-TILL ST4N | ST6NS | ST8NS 3.2 HYDARULICS CONNECTION Connect the hydraulics only when the hydraulic circuits of the machine and the tractor (aggregate) are in a pressure-less condition. The hydraulic system is under high pressure. Regularly check for leaks and immediately remove obvious ... -
Page 12: Folding And Unfolding Of The Machine
Manual STRIP-TILL ST4N | ST6NS | ST8NS 3.3 FOLDING AND UNFOLDING OF THE MACHINE Reduce the speed of the moving parts of the machine by throttling the respective valve on the control unit for all hydraulic movements before the end stop! The hydraulics for the folding and unfolding must be connected to the double-action control unit. -
Page 13: Hydraulics Machine Protection Function
Manual STRIP-TILL ST4N | ST6NS | ST8NS 3.4 HYDRAULICS MACHINE PROTECTION FUNCTION The hydraulic protection of the front cutters and the shares is provided by pressure accumulators. To ensure proper function, the protection circuits must be pressurized to 80 bar and left in the floating position. - Page 14 Manual STRIP-TILL ST4N | ST6NS | ST8NS Setting the front cutting disc hydraulic protection 1. Check that the hydraulic hoses are connected properly under 3.2. 2. Check that the ball valve of the front cutting disc protection circuit is open; if not, open it.
- Page 15 Manual STRIP-TILL ST4N | ST6NS | ST8NS Setting the ploughshare hydraulic protection 1. Check that the hydraulic hoses are connected properly under 3.2. 2. Check that the ball valve of the ploughshare protection circuit is open; if not, open it.
-
Page 16: Machine Transport On Roads
Manual STRIP-TILL ST4N | ST6NS | ST8NS 4. MACHINE TRANSPORT ON ROADS Transport position of STRIP-TILL Connect the machine by suspending on the tractor using the three-point suspension equipment. Fold the side frames to the transport position. The machine must be equipped with removable shields with marking of contours, functional lighting, and the board of the rear marking for slow vehicles (according to ECE No. - Page 17 Manual STRIP-TILL ST4N | ST6NS | ST8NS Folding the machine into transport position 1. Close the ball valve, see picture below. 2. Draw the working units on the side frames in – using the hose marked with one black strip.
-
Page 18: Adjusting The Working Depth Of The Machine
Manual STRIP-TILL ST4N | ST6NS | ST8NS 5. ADJUSTING THE WORKING DEPTH OF THE MACHINE Only adjust the machine when it is resting on the ploughshares, or when it is recessed (see below). 1. Set the lengthwise plain of th emachine by the position of the bottom tractor arms and adjusting the drawbar of the third tractor point. - Page 19 Manual STRIP-TILL ST4N | ST6NS | ST8NS 3. Set the crop residue spreaders so that they work with their own weight. If the soil is light and without crop residue, it is recommended to deactive the discs. 4. Set the packing discs by changing the position of the pins according to the current conditions so that soil stays within the defined loosened strip.
- Page 20 Manual STRIP-TILL ST4N | ST6NS | ST8NS 5. Set the down pressure of the spiked roller using the adjusting pins. 2–5 cm 6. Set the down pressure of the front spreading discs by extending/drawing in the tine in the holder.
-
Page 21: Machine Maintenance And Repair
Manual STRIP-TILL ST4N | ST6NS | ST8NS 6. MACHINE MAINTENANCE AND REPAIR Observe the safety instructions for treatment and maintenance If it is necessary to weld during the repair and have the machine connected to the tractor, it must have ... -
Page 22: Environmental Protection
This provision does not apply to the replacement of wearable spare parts (see point 10.2.3). 10.2.8 The warranty is conditioned by using the genuine spare parts of the manufacturer. Prepared by: Technical Department, Farmet a.s., Jirinkova 276, Ceska Skalice 552 03, On 4 October 2021, changes reserved. 22 │ 23... -
Page 23: Ce Certificate Of Conformity
CE CERTIFICATE OF CONFORMITY EG-KONFORMITÄTSERKLÄRUNG DÉCLARATION CE DE CONFORMITÉ СЕРТИФИКАТ СООТВЕТСТВИЯ ЕС DEKLARACJA ZGODNOŚCI WE Nous Мы Farmet a.s. Jiřinková 276 552 03 Česká Skalice Czech Republic DIČ: CZ46504931 Tel/Fax: 00420 491 450136 Vydáváme na vlastní zodpovědnost toto prohlášení. Hereby issue, on our responsibility, this Certificate.
Need help?
Do you have a question about the STRIP-TILL ST4N and is the answer not in the manual?
Questions and answers