Installing The Turbocharger; Fig. 5: Placing The Turbocharger - ABB XAC22175 Operation Manual

Operation Manual / 4 Product description / A100-L
2 Removal and installation / 2.3 Installing the turbocharger
2.3

Installing the turbocharger

2.3.1 Placing the turbocharger on the bracket
Fig. 5: Placing the turbocharger
Remove covers from the oil connections.
u
Align turbocharger and place on engine bracket.
u
Tighten the fixing screws
u
loosening the lifting gear.
Remove lifting gear from suspension eyes of the bearing casing.
u
Connect cable to speed sensor.
u
Connect all gas, air and oil pipes.
u
© Copyright 2020 ABB. All rights reserved.
(Steps for fastening the turbocharger
HZTL4034_EN
→11) while only slightly
Rev.P January 2020