Fig. 61: Fitting The Filter Silencer; Table 43: Tightening Torque (72004) - ABB XAC22175 Operation Manual

Operation Manual / 4 Product description / A100-L
8 Disassembly and assembly / 8.21 Fitting the filter silencer
2. Position filter silencer on compressor casing.
3. Fit nuts (72004) with washers (72003) and tighten.
Fit insulation as far as necessary.
u
8.21.3 Fitting the filter silencer (cast)
If the turbocharger is also fitted with a noise package, chapter Fitting the filter silencer with
noise package must be observed.
Fig. 61: Fitting the filter silencer
Product
A165-L
A170-L
A175-L
A180-L
A185-L
A190-L
Table 43: Tightening torque (72004)
1. Attach the lifting gear to the front lug and rear eyelet of the filter silencer (81000).
2. Position filter silencer on compressor casing.
3. Fit nuts (72004) with washers (72003) and tighten.
Fit insulation as far as necessary.
u
© Copyright 2020 ABB. All rights reserved.
Size
M14
M16
M18
M20
M22
M24
HZTL4034_EN
Tightening torque [Nm]
130
200
300
420
570
710
Rev.P January 2020