Table of Contents
Advertisement
Making calls
1
Lift the handset and dial the phone
number.
R To correct a digit, press MCN.
2
M
N
3
When you finish talking, press M
place the handset on the base unit or
charger.
Using the speakerphone
1
Dial the phone number and press MZN.
R Speak alternately with the other party.
2
When you finish talking, press M
Note:
R To switch back to the receiver, press MZN/
M
N.
Adjusting the receiver or speaker
volume
Press MDN or MCN repeatedly while talking.
Making a call using the redial list
The last 10 phone numbers dialled are stored
in the redial list (each 24 digits max.).
1
MTN
2
MbN: Select the desired entry.
3
M
N
Erasing a number in the redial list
1
MTN
2
MbN: Select the desired entry. a M
3
MbN: "Yes" a MOKN a M
Pause (for PBX/long distance service
users)
A pause is sometimes required when making
calls using a PBX or long distance service.
When storing a calling card access number
and/or PIN in the phonebook, a pause is also
needed (page 17).
TGC41xHK_(en-hk)_0622_ver001.pdf 13
Example: If you need to dial the line access
number "0" when making outside calls with a
PBX:
1
0 a MDN (Pause)
2
Dial the phone number. a M
Note:
R A 3 second pause is inserted each time MDN
N or
(Pause) is pressed.
Answering calls
1
Lift the handset and press M
when the unit rings.
2
When you finish talking, press M
N.
place the handset on the base unit or
charger.
Any key answer: You can answer the call by
pressing any dial key.
Auto talk: You can answer calls simply by
lifting the handset (page 19).
Temporary handset ringer off: You can turn
the ringer off temporarily by pressing M
Adjusting the ringer volume
Press MDN or MCN repeatedly to select the
desired volume while ringing.
Useful features during a
call
Hold
1
Press M
N
2
MbN: "Hold" a MOKN
N
3
To release hold, press M
Note:
R After holding for 10 minutes, the call is
disconnected.
Mute
1
Press M N during a call.
Making/Answering Calls
N
N or MZN
N during an outside call.
N.
22/6/2016 4:24:23 PM
N or
N.
13
Advertisement
Table of Contents
