Table of Contents
Advertisement
RS16 FS – Manual v.6.1A
3.
Voltage light: Green means normal voltage. Red represents
abnormal voltage..
4.
UPS light: Green means UPS works well. Red represents UPS
failure.
5.
Fan light: Green means Fan works well. Red represents fan
failure. (Only for backplane solution)
6.
Power light: Green means Power works well. Red represents
power failure. (Only for backplane solution)
3.3 Quick install
It is easy to use "Quick install" to create a volume. It uses whole physical disks
to create a RG; the system will calculate maximum spaces on RAID levels
0/1/3/5/6/0+1. "Quick install" will occupy all residual RG space for one VD, and
it has no space for snapshot and spare. If snapshot is needed, please create
volumes by manual, and refer to section 4.4 for more detail. If some physical
disks are used in other RGs, "Quick install" can not be run because the
operation is valid only when all physical disks in this system are free.
Step 1: Click "Quick install", then choose the RAID level. After choosing the
RAID level, then click "
". It will link to another page.
Figure 3.3.1
- 19 -
Advertisement
Table of Contents
