Table of Contents
Advertisement
RS16 FS – Manual v.6.1A
Logout
3.2 Login
ULTRASTOR RS16 FS controller supports graphic user interface (GUI) to
operate the system. Be sure to connect the LAN cable. The default IP setting is
DHCP; open the browser and enter:
http://192.168.10.50 (Please check the DHCP address first on LCM.)
Click any function at the first time; it will pop up a dialog for authentication.
Login name: admin
Default password: 1234
After login, you can choose the functions which lists on the left side of window to
make configuration.
There are six indicators at the top-right corner for backplane solutions, and
cabling solutions have three indicators at the top-right corner.
1.
RAID light: Green means RAID works well. Red represents RAID
failure.
2.
Temperature light: Green means normal temperature. Red
represents abnormal temperature.
Reboot / Shutdown
Reboot and
shutdown
Sure to logout?
Figure 3.2.1
Figure 3.2.2
- 18 -
Advertisement
Table of Contents
