Management Methods - proavio RS16FS User Manual

RS16 FS – Manual v.6.1A
The target is the storage device itself or an appliance which controls and serves
volumes or virtual volumes. The target is the device which performs SCSI
commands or bridges to an attached storage device.

2.3 Management methods

There are three management methods to manage ULTRASTOR RS16 FS
controller, describe in the following:
2.3.1 Web GUI
RS16FScontrollers support graphic user interface to manage the system. Be
sure to connect LAN cable. The default setting of management port IP is DHCP
and DHCP address displays on LCM; user can inspect LCM for IP first, then
open the browser and type the DHCP address: (The DHCP address is dynamic
and user may need to check every time after reboot.) When DHCP service is not
available, controllers use zero configuration (Zeroconf) to get an IP address.
Take an example on LCM:
192.168.10.50
UltrsStor RS16 F ←
http://192.168.10.50
or
https://192.168.10.50 (https: connection with encrypted Secure Sockets Layer
(SSL). Please be aware of the https is slower than http. https is supported on
some specified models.)
Click any function at the first time; it will pop up a dialog to authenticate current
user.
Login name: admin
Default password: 1234
Or login with read-only account which only allows reading the configuration and
cannot change setting.
Login name: user
Default password: 1234
- 12 -