RS16 FS – Manual v.6.1A
2.3.2
Console serial port
Use NULL modem cable to connect console port.
The console setting is baud rate: 115200, 8 bits, 1 stop bit, and no parity.
Terminal type: vt100
Login name: admin
Default password: 1234
2.3.3
Remote control – secure shell
SSH (secure shell) is required for controllers to remote login. The SSH client
software is available at the following web site:
SSHWinClient WWW:
Putty WWW:
http://www.chiark.greenend.org.uk/
Host name: 192.168.10.50 (Please check your DHCP address for this field.)
Login name: admin
Default password: 1234
Tips
ULTRASTOR RS16 FC controllers only support SSH for
remote control. For using SSH, the IP address and password
are required for login.
2.4 Enclosure
2.4.1
LCM
There are four buttons to control RS16FSLCM (LCD Control Module), including:
(up),
(down), ESC (Escape), and ENT (Enter).
After booting up the system, the following screen shows management port IP and
model name:
192.168.10.50
RS16FS←
Press
the
"ENT",
"Reset/Shutdown", "Quick Install", "Volume Wizard", "View IP Setting",
http://www.ssh.com/
LCM
functions
- 13 -
"System
Info.",
"Alarm
Mute",