proavio RS16FS User Manual page 14

RS16 FS – Manual v.6.1A
"Change IP Config" and "Reset to Default" will rotate by pressing
(down).
When there is WARNING or ERROR occurred (LCM default filter), the LCM
shows the event log to give users more detail from front panel.
The following table is function description.
System Info.
Alarm Mute
Reset/Shutdown
Quick Install
Volume Wizard
View IP Setting
Change IP
Config
Reset to Default
The following is LCM menu hierarchy.
Proavio,
U.S.A.
[System Info.]
[Alarm Mute]
[Reset/Shutdown]
Display system information.
Mute alarm when error occurs.
Reset or shutdown controller.
Quick steps to create a volume. Please refer to next
chapter for operation in web UI.
Smart steps to create a volume. Please refer to next
chapter for operation in web UI.
Display current IP address, subnet mask, and gateway.
Set IP address, subnet mask, and gateway. There are 2
options: DHCP (Get IP address from DHCP server) or
static IP.
Reset to default will set password to default: 1234, and
set IP address to default as DHCP setting.
Default IP address: 192.168.10.50 (DHCP)
Default subnet mask: 255.255.255.0
Default gateway: 192.168.10.254
[Firmware
Version
x.x.x]
[RAM Size
xxx MB]
[ Yes No ]
[Reset]
[Shutdown]
- 14 -
[ Yes
No ]
[ Yes
No ]
(up) and