Using the Tools (continued)
HydroRinse™ Self-Cleaning Hose Tool
4. Switch machine to Rinse
mode and turn ON.
After-Cleaning Care
Emptying the Dirty Water Tank
1. Remove the dirty water
tank.
4. Handwash tank with mild
dish soap. Dry for 24 hours
before reassembling.
Note: This tank is not
dishwasher safe.
6 BISSELL.com
5. Hold the hose and tool in
an upright position with the
machine ON. Hold down the
trigger for 30 seconds.
2. Twist cap and remove
separator stack.
5. Place separator stack and
cap onto dirty water tank and
firmly tighten.
6. Release trigger and let
machine run for 30 seconds to
clear water in hose. Empty the
dirty water tank after use.
3. Empty and rinse tank.
6. Reinstall tank.