Microsensor MPM426W Series Operation Manual page 13

b) Be sure unpacking carefully and prevent damaging instruments or
accessories. Pay attention to the housing jacket and rubber bushing
of transmitter cable.
5.2 Shipment Enclosed
The transmitter should be enclosed when out of factory：
MPM426W Series Level Transmitter
Cable (assembled with transmitter)
Production Manual
Production Qualification Certificate
7.3 Storage
The transmitter should be stored in dry ventilate room, ambient
temperature -20℃~85℃ and the relative humidity≤85%, no corrosive
substance in the room.
6. Operation, maintenance and troubleshooting
6.1 Operation
After the transmitter is installed according to the instructions, it can be put
into operation.
Before putting it into operation, please strictly check whether the
installation and electrical connection are correct.
Turn on the power and put it into operation.
The transmitter can work when it is connected to the power supply, but
Based on order
12
1pc
1pc
1pc