Wahl Digi-Stem DST600 Series User Manual page 14

8.2. DST611/651 - All the features of the DST610/650, and includes a pre-
wired Turck 4-pin connector mounted in the side enclosure fitting. This
allows convenient user connection/disconnection. This option requires
the use of a connecting cable or connector (ordered separately).
Connector wiring are shown in Figure A2.
8.2.1. Optional IP68 rated field wireable connectors and cables:
Wahl P/N
12075-07 Straight field wireable connector, 4-6 mm cable gland
12075-08 Straight field wireable connector, 6-8 mm cable gland
12075-09 Right angle field wireable connector, 4-6 mm cable gland
12075-10 Right angle field wireable connector, 6-8 mm cable gland
Cable assemblies are single-ended and feature a molded IP68 rated
connector. Opposite end is left un-stripped. Insulation is PVC and rated
to 105°C.
Wahl P/N
12361-xxx xxx denotes length in meters, i.e. 12361-010 is 10-meter
cable, 12361-120 is 120-meter length.
Connections for 12361 cable for DST611/651 are as follows:
Wire Color
Brown
White
Blue
Black
Non-insulated
*Shield lead should not be terminated if either meter housing or
probe shank is grounded, to avoid ground loops.
Fig. 7 – DST611/651 connector wiring
DST600 Series USER MANUAL
Description
Description
Connection
Pin 1
Pin 2
Pin 3
Pin 4
Coupling nut
14 of 20
Signal
Excite +
RTD +
RTD -
Excite -
Shield*