Table of Contents
Advertisement
4.6.11 Changing the selections after programme has started
After the programme has started you can make the following changes.
Switching the product to pause mode
Press the Start/Pause button to switch the machine to pause mode while a programme is
running. The light of the step and Start/Pause which the machine is in, starts flashing in
the Programme Follow-up indicator to show that the machine has been switched to the
pause mode. Also loading door light blinks until the door is ready to be opened. When the
loading door is ready to be opened Loading Door light will turn off, programme step light
and Start / Pause light will continue to flash.
Also, when the loading door is ready to be opened, Loading Door light will also turn off in
addition to the programme step light.
Changing the auxiliary function, speed and temperature
Depending on the step the programme has reached, you can cancel or select the auxiliary
functions. See "4.6.7 Auxiliary function selection".
Also you can change temperature and cycle adjustments. See "4.6.5 Temperature
selection" and "4.6.6 Spin speed selection".
C
If no change is allowed, the relevant light will flash for 3 times.
Adding or taking out laundry
1. Press the Start / Pause button to switch the product to pause mode. The programme
follow-up light of the relevant step during which the machine was switched into the
pause mode will flash.
2. Wait until the Loading Door can be opened.
3. Open the Loading Door and add or take out the laundry.
4. Close the Loading Door.
5. Make changes in auxiliary functions, temperature and speed settings if necessary.
6. Press the Start / Pause button to operate the product.
4.6.12 Child Lock
Use Child Lock function to prevent children from tampering with the product. Thus you can
avoid any changes in a running programme.
C
You can switch on and off the product with On / Off button when the Child Lock is active.
When you switch on the product again, programme will resume from where it has stopped.
To activate the Child Lock:
Press and hold 2nd Auxiliary Function button for 3 seconds. In the programme
selection display on the panel, "CL On" light will turn on. When this light is on you can stop
pressing on 2nd Auxiliary Function button .
To deactivate the child lock:
Press and hold 2nd Auxiliary Function button for 3 seconds. In the programme
selection display on the panel, "CL Off" light will turn on.
32 / EN
Washing Machine / User's Manual
Advertisement
Table of Contents
