Logging In To The Cli Using Putty Over A Serial Port - Huawei FusionServer Pro 1288H V5 User Manual

FusionServer Pro 1288H V5 Server
User Guide

9.4.2 Logging In to the CLI Using PuTTY over a Serial Port

Scenarios
Use PuTTY to log in to a server over a serial port when:
●
●
Procedure
Step 1 On the PC, double-click PuTTY.exe.
The PuTTY Configuration window is displayed.
Step 2 In the navigation tree, choose Connection > Serial.
Step 3 Set the login parameters.
The parameters are described as follows:
●
●
●
●
●
●
Step 4 In the navigation tree, choose Session.
Step 5 Select Serial under Connection type.
Issue 13 (2020-06-05)
You want to perform initial configuration of the server.
The server is inaccessible over a network port.
● You can obtain the PuTTY software from the chiark home page.
● You are advised to use PuTTY of the latest version. PuTTY of an earlier version may
cause login failures.
Serial Line to connect to: COMn
Speed (baud): 115200
Data bits: 8
Stop bits: 1
Parity: None
Flow control: None
n in COM n indicates a serial port number, and its value is an integer.
Copyright © Huawei Technologies Co., Ltd.
9 Common Operations
118