Tourmaster Synergy Pro-Plus User Manual & Installation Manual page 5

Connect the negative (-) wire from the Synergy
6.
harness to the negative (-) battery terminal and then reconnect the vehicle's
negative (-) cable to the negative (-) battery terminal. Be sure to securely fasten
the attachment screw. (The negative (-) wire from the Synergy
lead wiring harness is marked with a black colored end)
7. Route the electrical connector of the Synergy
harness to the left side of the vehicle's seat. To ease connection with Synergy
Plus garments, allow a minimum of 2" of the cable to extend from under the seat.
8. Secure the Synergy
portions of the vehicle with nylon cable ties or electrical tape.
9. Return any vehicle body panels or equipment to their original location per your
vehicle's manufacturer supplied owner's manual.
CAUTION: It is important that the wiring be routed away from moving parts or
hot areas that could cause potential damage.
Connecting To The Synergy
Connecting Synergy
multiple Synergy Pro-Plus garments together is quick and easy.
®
While connecting Synergy
recommended that the wearer be seated in or on their vehicle and be wearing the Synergy
Pro-Plus apparel.
WARNING: Make sure that the vehicle's motor is running before connecting
Synergy Pro-Plus garments to the Synergy
®
do so may create a power surge that could damage the garment's circuitry
and heating elements.
Pro-Plus power lead wiring harness to the frame or other rigid
®
Synergy
®
Pro-Plus apparel to the Synergy
®
Pro-Plus garments to the Synergy
®
Pro-Plus power lead wiring
®
Pro-Plus power lead wiring
®
Pro-Plus Power Lead
®
Jacket or Vest Liner
Pro-Plus power lead or connecting
®
Pro-Plus power lead. Failure to
®
Pro-Plus power
®
Pro-Plus power lead, it is
®
5
Pro-
®
®