Table of Contents
Advertisement
4.1
Product CD/DVD
The FWS-2253 comes with a product DVD that contains all the drivers and utilities you
need to setup your product. Insert the DVD and follow the steps in the autorun
program to install the drivers.
In case the program does not start, follow the sequence below to install the drivers.
Step 1 – Install Chipset Drivers
1.
Open the Step 1 - Chipset folder followed by the SetupChipset.exe file
2.
Follow the instructions
3.
Drivers will be installed automatically
Step 2 – Install Graphics Driver
1.
Open the Step 2 - Graphics and select your OS
2.
Open the Setup.exe file in the folder
3.
Follow the instructions
4.
Drivers will be installed automatically
Step 3 – Install Network Driver
1.
Open the Step 3 - Network folder and select your OS
2.
Open the.exe file in the folder
3.
Follow the instructions
4.
Drivers will be installed automatically
Step 4 – Install xHCI Driver (Windows 7 only)
1.
Open the Step 4 - xHCI folder followed by Setup.exe
Chapter 4 – Driver Installation
39
Advertisement
Table of Contents
