Connecting The Bicycle Hitch - Duramaxx Carry Grey Manual

Connect the trailer to the bicycle hitch. Press the red trigger. Fold out the drawbar.
Now use the pre-assembled screw (M8x50mm).

CONNECTING THE BICYCLE HITCH

1. Fitting the coupling to the seat post
Place the plastic chuck on the seat post and put the clamp on. Use the two pre-
assembled M8x50mm screws to fix the coupling ball.
2. Connecting the trailer to the hitch
Pull the ball head of the drawbar over the coupling ball. Tighten the locking
screw to keep the coupling stable. This prevents the drawbar from coming off
the hitch.
4
EN
13