Kyocera F-1000A User Manual page 35

KX Print Driver Prologue / Epilogue Feature
Initiating PRESCRIBE Macros from Microsoft Windows
The Kyocera Extended Print Driver, KX Print Driver, has an added module called Prologue / Epilogue. This module
allows the user to start (Prologue) and to end (Epilogue) a Windows print job with a text based file (Notepad or
Wordpad) containing PRESCRIBE commands. This feature is generally used to initiate a CALL for a Macro or an
AMCR for a Macro. These Macro's are described as follows:
CALL Macro – will call a macro to overlay with print data on the first page.
AMCR Macro – will call a macro to overlay with print data on all pages printed to the printer.
In each case a PRESCRIBE Macro is required to be built onto the printer. The following instructions outline the
process of creating the trigger to initiate or call these macros using the Kyocera KX Print Driver Prologue / Epilogue
feature as follows:
CALL Macro / AMCR Macro
1. Determine which type of Macro you are setting up on the printer. CALL, AMCR, EMCR. Using Microsoft Notepad
and the sample templates given below, create the Microsoft Notepad as follows:
NOTE: In both cases for the CALL Macro and the AMCR Macro, the <macroname> is substituted with the actual
macro name.
2. Save the Notepad file to a folder on the PC, the file will need to exist in a permanent location on the PC so it is
important to select a folder that does not have a chance of being deleted or moved at a later time.
IC Link for Windows
CALL Macro AMCR Macro
{PAGE }