Kyocera KM-6030 Ftp Transmission Manual page 2

How to perform FTP transmission
This section explains how to scan an image using the FTP transmission function.
1 Press the [Scanner] key.
2 Press [Scan to FTP].
3 Select the sender (user). Press directly
the number key, or enter the user
number using the numeric keys and
press [Enter].
If the password is already entered with
the user registration, the password entry
screen is displayed. Enter the password
and press [Enter].
4 Press [Address book].
5 Use [ ] and [ ] to select the
transmission destination FTP server.
Press [Add dest.] to login to the FTP
server.
is displayed at the selected
transmission destination.
Select scanner function.
Send Edit
Scan to PC TWAIN
E-mail addr. book
Database Scan to History
Connection FTP of sending
Stop
ame.
User number
(with #key)
Enter
Stop
Password (Enter by #key)
Clear
Enter
Original
Ready to scan.
Place the original and select destination.
Scan to FTP-Continuous TX Sending to
Destination
Auto Back Edge
Select Orig. set
orig.size direction
Auto size 200dpi
Delete Select Scanning
send size resolution
Address
Quality
Basic
book
Close
Address Select: 1 About
0-9
Up
dest.
FTP01
GHI
FTP02
OPR
FTP03
YZ
FTP04
Add
Down
FTP05 dest.
k
01/0
6
7
Note
8
Error messages and corrective actions
11x17"
01/0
When selecting FTP server for which
User Name & Password
you select [NO] for Skip Authentication,
enter the user name and the password
using the procedure [Close].
User name:
1. Press [Change #] at User name.
2. Enter the user name.
3. Press [End].
Password:
1. Press [Change #] at Password.
2. Enter the password.
3. Press [End].
Press [Close].
Set up for scanning.
to scan.
iginal and select destination.
ntinuous TX
Address
book
For scanning set up, refer to the Functions Edition of the Operation Guide (On-Line Manual).
Place the original and press the [Start]
Now scanning originals.
key to start scanning.
Orig._Set_Direction
When scanning is complete, the
Orig. page
1
machine uploads the scan data to the
transmission destination FTP server.
------
1 sided
Rear
User name: User A
Error messages that appear in FTP transmission and corrective actions are as below.
Error Error message Corrective action
code
E080 Unable to find FTP server. Confirm that the network cable is properly connected.
Contact administrator. Also contact the server administrator or appropriate
person to confirm that the FTP server is properly
operating.
E081 Unable to Log in to the FTP Login to the FTP server has failed. Check to see if the
Server user name and the password are properly registered.
E082 The Path attempted to use for The storage folder is not found or the path to the storage
saving does not exist folder is incorrect. Check that the storage folder in the
FTP server matches the path setting registered in the
machine.
E083 Error occurred at FTP Server Storage has failed with unexpected response from the
Please contact Administrator FTP server. Contact the server administrator or
appropriate person to confirm that writing is permitted to
the login user account.
Back
User name :
Change #
Password :
Change #
Original Send
------ 11x17"
01/04/`05 11:30
Sending to Cancel
Auto Back Edge Auto
Select Orig. set File name
orig.size direction Input
Auto size 200dpi TIFF
Delete Select Scanning
File type
send size resolution
Quality Edit
Basic
01/0
Send
Scan to FTP
11x17"
SCAN0060_000.tif