Placing the limb cuff on target location
1.
Place the device over the implant location over a thin layer of clothing and wrap the strap around
your limb.
2.
Place the strap through the loop and pull the strap to tighten the limb cuff.
3.
Secure the limb cuff in place using the Velcro tab.
Removing the limb cuff
1.
Undo the Velcro strap and loosen the limb cuff.
2.
Remove the limb cuff
Removing the device from the limb cuff
1.
Undo the snap button.
2.
Pinch the device on the top and bottom and pull out of the pocket.
Nalu User's Kit Instructions for Use PN: MA-000007 Rev J
Page 41 of 80