Connecting The Trial Therapy Disc (For The Trial System Only); Increasing Stimulation From The Therapy Disc; Decreasing Stimulation From The Therapy Disc - nalu 12001-040 User Instructions For Use

Connecting the Trial Therapy Disc (For the
Trial System Only)
1. Plug the micro HDMI adapter into the micro HDMI
port on the Trial Therapy Disc as shown in Error! R
eference source not found..
2. Three (3) short beeps will sound when the Trial
Therapy Disc connects to the lead.

Increasing Stimulation from the Therapy Disc

1. Press and release the Up button.
2. The green LED will blink after each button press.
Maximum Stimulation: When at the maximum level of stimulation, further attempts to
increase stimulation will cause the buzzer to beep twice and the orange LED to blink
twice.

Decreasing Stimulation from the Therapy Disc

1. Press and release the Down button.
2. The green LED will blink after each button press.
Minimum Stimulation: When at the minimum level of stimulation, further attempts to
reduce stimulation will cause the buzzer to beep twice and the orange LED to blink twice.
Nalu User's Kit Instructions for Use PN: MA-000007 Rev J
Figure 1: Connect Trial Therapy Disc
to Electrode Interfacing Cable
Page 30 of 80