Powering Off The Therapy Disc - nalu 12001-040 User Instructions For Use

Powering OFF the Therapy Disc

1. The buzzer will beep once every second when the Therapy Disc is disconnected from the
implant after having been connected.
2. Press and hold the ON / OFF Program button.
3. The white LED will blink while the Therapy Disc shuts down completely. The white LED
will stop blinking after the Therapy Disc has powered off.
NOTE: If the Therapy Disc is turned off while it is in the Schedule mode and the
Schedule was running an Idle program, the Schedule will start from the stimulation
program that follows that Idle program when the Disc is powered back on.
Nalu User's Kit Instructions for Use PN: MA-000007 Rev J
Page 32 of 80