Applying The Clip - nalu 12001-040 User Instructions For Use

Applying the Clip

1. Remove the adhesive liner, as shown in Figure 5.
2. Grasp the clip between your thumb and finger and place your index
finger through the center hole. The clip should be held, as shown in
Figure 6.
3. Use your inserted index finger and locate the
implant site, as shown in Figure 7.
4. Once the implant site has been located, press
the clip against your skin, ensuring the heel
(where the therapy disc sits) is towards the
bottom.
Nalu User's Kit Instructions for Use PN: MA-000007 Rev J
Figure 5 Remove Liner
Figure 7 Locate Implant
Figure 6 Clip Orientation
Page 36 of 80