Design And Function - NetterVibration VibroScanner VSI Operating Instructions Manual

Design and function

4 Design and function
Design
No.
1
2
3
4
5
6
7
8
The VSI consists of an acceleration sensor and a controller, via which both
Function
the voltage supply of the sensor and the signal evaluation takes place.
The VSI are used to measure the acceleration, the dominant frequency
and the vibration amplitude of mechanical vibration using a capacitive, mi-
cromechanical (MEMS) sensor.
fore contribute significantly to the long-term successful operation of a vi-
bration system.
Element
Controller/measuring unit
Button: configuration
Display
DIP-switch
Connection terminal:
current output and power
supply
Connection terminal:
Voltage output and power
supply
Connection terminal: sensor
Sensor with sensor cable
The VSI enables continuous quantitative process control and can there-
Function
Contains the electronic components, the connec-
tions and the display.
Setting the values shown on the display.
Shows measured values.
Configure controller.
Connect current output and power supply.
Connect voltage output and power supply.
Connect sensor with the controller.
Acquires values for acceleration and frequency
on vibration systems. Is connected to the control-
ler via the sensor cable.
9