Safety - NetterVibration VibroScanner VSI Operating Instructions Manual

Safety

2 Safety
VSI controllers are intended for assembly in switch cabinets and control
Intended use
cabinets. VSI sensors are intended for installation in vibration systems.
VSI are used to measure the acceleration and dominant frequency of me-
chanical vibrations by means of an acceleration sensor.
Possible applications are the measurement of the operational parameters
of vibration systems, e. g. frequencies and effective accelerations in vibra-
tion feeders and conveyors, vibration compactors or vibration test sys-
tems.
Any other use is considered improper.
Qualification Installation, commissioning, maintenance and troubleshooting of the VSI
of qualified may only be performed by authorised qualified personnel.
personnel
All handling of the VSI is the responsibility of the operator.
High voltage
DANGER
Risk of electric shock due to high voltage
Live parts can cause severe injuries or even death.
 The electrical installation may only be carried out by au-
thorized qualified personnel.
 Control cabinet doors must not be opened during opera-
tion.
 All work on the system may only be carried out in a volt-
free state.
 Observe the permissible protection class and protective
grounding. The VSI may only be operated with the cor-
rect connection of the protective conductor.
 Perform all work only with insulated tools suitable for the
application.
5