Automatic Mode Operation - Norcold Polar 7 Series Installation Manual

Manual LP Gas Mode Operation:
- Touch and release the ON/OFF button [30] to start the refrigerator.
- Touch the MODE button [31] until the AUTO icon goes off and only the FLAME icon [284] remains lit.
- Touch the TEMP SET button [32] as needed, to set the temperature setting.
- FLAME icon [284] remains lit until you select a different operating mode or shut down the refrigerator.
- If the indicator light [185] glows solid red, it means:
- There is a problem and the refrigerator is not cooling.
- Refer to the "Fault code" section of this manual.
Manual DC Operation: (3-way Only)
- Touch and release the ON/OFF button [30] to turn the refrigerator on.
- Touch the MODE button [31] until the AUTO icon goes off and only the BATTERY icon [361] remains lit.
- Touch the TEMP SET button [32] as needed, to set the temperature setting.
- The Battery icon [361] remains lit until you select a different operating mode or shut down the refrigerator.
Shut down - All models:
- To shut down the refrigerator, touch and hold the ON/OFF button for two seconds and then release.
Operating the Refrigerator Controls (N7LX & N8LX Models)

Automatic Mode Operation:

Control boards are extremely sensitive. Evidence of tampering or removal from protective case
NOTICE
will VOID any warranty.
- Touch and release the ON/OFF button [30] to turn the refrigerator on. (See Art 02629).
- Touch the TEMP SET button [32] as needed to set the
temperature setting.
- Number one (1) shown in the display [187] is the warmest
setting.
- Number nine (9) shown in the display [187] is the coldest
setting.
- If the AUTO icon [277] and AC PLUG icon [278] are lit up, it
means that:
- 120 volt AC power is available to the refrigerator.
- The refrigerator is operating on AC electric power.
- After ten seconds, the backlight of the display goes off.
- If the AUTO icon and the FLAME icon [289] are lit up, it means that:
- 120 volt AC power is not available to the refrigerator.
- The refrigerator is operating on propane gas.
- After ten seconds, the backlight of the display goes off.
278
MODE
NORCOLD
30 31
361 289
set
AUTO
CODE
277 187 32
Art 02629
Installation Manual 19