Key Refrigerator Dimensions; Assemble The Enclosure For The Refrigerator - Norcold Polar 7 Series Installation Manual

Key Refrigerator Dimensions

These key refrigerator dimensions are for your reference as necessary
(See Art02728).
Refrigerator cabinet width w/o trim - 23.47 in. max. ... 1
Refrigerator width overall w/ trim - 24.6 in. ................. 2
Refrigerator cabinet to side trim - 0.80 in. .................. 3
Refrigerator cabinet height w/o trim............................ 4
N7 models - 52.85 in. max.
N8 models - 59.85 in. max.
Refrigerator height overall w/ trim............................... 5
N7 models - 54.5 in.
N8 models - 61.5 in.
Refrigerator cabinet to top/bottom trim - 0.93 in. ........ 6
Enclosure wall to hinges - 1.10 in. .............................. 7
Refrigerator cabinet to center of handles ................... 8
N7 models - 32.5 in.
N8 models - 39.5 in.

Assemble the Enclosure for the Refrigerator

1. Make sure the enclosure is 59.88 - 60.01 inches high for N8V, N8X, N8LX models or 52.88 - 53.01 inches high for N7V, N7X and
N7LX models x 23.50 - 23.63 inches wide x 24.00 inches deep.
2. Make sure the floor is solid and level.
- The floor must be metal or a wood panel and extend the full width and depth of the enclosure.
- The floor must be able to support the weight of the refrigerator and its contents.
3. Make sure there are no adjacent heat sources such as a furnace vent, a hot water heater vent, etc.
4. If there is more than 1/2 inch between either side of the refrigerator and the inside of the enclosure:
- Fill the space with fiberglass insulation or add a baffle to eliminate the excess clearance.
- Make sure that the rear of the batt-type insulation is between 18 - 19 inches from the face of the enclosure.
- Securely attach the batt-type insulation to the enclosure so that it remains in this position during refrigerator installation, if it
becomes wet, and in windy conditions.
1
3
7
5
8
Installation Manual 5
6
4
Art 02728