Norcold N610 Installation Manual
  1. Manuals
  2. Brands
  3. Norcold Manuals
  4. Refrigerator
  5. N610 -
  6. Installation manual

Norcold N610 Installation Manual

6/8 cu.ft., 2-way, r.v. refrigerators
Hide thumbs Also See for N610:
Table of Contents

Advertisement

Quick Links

See also: Owner's Instructions
For N61X models:
For N81X models:
The letter "X", in the model numbers above, stands for a letter or numeral which means a refrig-
erator option.
WARNING:
can cause personal injury or property damage. Refer to this manual.
For assistance or additional information, contact a qualified installer,
service agency, or the gas supplier.
FOR YOUR SAFETY
Do not store or use gasoline or other flammable vapors and liquid in
the vicinity of this or any other appliance.
FOR YOUR SAFETY
If you smell gas:
WARNING:
DO NOT install this refrigerator in below
deck marine applications. Do not install this refrigerator in
fixed indoor cabin or other dwelling applications. This
refrigerator must use only NORCOLD designed and ap-
proved outside air intake and exhaust ventilation for correct
and safe operation. Any other ventilation could cause lethal
combustion exhaust fumes and/or explosive propane gas
fumes to be in the living area and/or to be below deck.
NORCOLD, Inc.
P.O. Box 4248
Sidney, OH 45365-4248
Improper installation, adjustment, alteration, service or maintenance
1. Open windows.
2. Don't touch electrical switches.
3. Extinguish any open flame.
4. Immediately call your gas supplier.

Installation Manual

6 cu.ft., 2-way, R.V. refrigerators.
8 cu.ft., 2-way, R.V. refrigerators.
English
French
Part No. 628955A (2-06)

Advertisement

Table of Contents
loading

Related Manuals for Norcold N610

Summary of Contents for Norcold N610

  • Page 1: Installation Manual

    4. Immediately call your gas supplier. WARNING: DO NOT install this refrigerator in below deck marine applications. Do not install this refrigerator in fixed indoor cabin or other dwelling applications. This refrigerator must use only NORCOLD designed and ap- proved outside air intake and exhaust ventilation for correct and safe operation.

  • Page 2: Table Of Contents

    Be aware of possible safety hazards when you see the safety alert symbol on the refrigerator and in this manual. A signal word follows the safety alert symbol and identifies the danger of the hazard. Carefully read the descriptions of these signal words to fully know their meanings.

  • Page 3: Certification And Code Requirements

    If this air flow is blocked or decreased, the refrigerator will not cool correctly. Each NORCOLD model is certified by CSA International for correct ventilation.

  • Page 4: Key Refrigerator Dimensions

    Refrigerator cabinet width w/o trim - 23.1in..1 Refrigerator width overall w/ trim - 24.6in..2 Refrigerator cabinet to side trim - 0.80 in..3 Refrigerator cabinet height w/o trim ... 4 N600 models - 52.6 in.
  • Page 5 - If the design of the vehicle does not allow you to install a roof exhaust vent, install an upper side-wall exhaust vent. NOTE: The refrigerator is 23.7 in. min. to 24.0 in. max. from the rear of the breaker to the rear of the condenser [11].

  • Page 6: Install Decorative Door Panels

    - Push the refrigerator completely into the enclosure. - Put the upper trim piece [13] onto the front of the refrigerator. - Put screws [12] through the upper and lower mounting flanges on the front of the refrigerator and into the enclo- sure wall and floor.

  • Page 7: Reverse The Door Swing-Nonmetal Doors (Optional)

    - Remove and save the screw [7] from the front box [6] (See Art01573). - Pull the front box away from the refrigerator and out from under the controls [8]. - Reverse the front box and put it on the opposite side of the controls.

  • Page 8: Reverse The Door Swing-Metal Doors (Optional)

    - Remove and save the screw [7] from the front box [6] (See Art01573). - Pull the front box away from the refrigerator and out from under the controls [8]. - Reverse the front box and put it on the opposite side of the controls.

  • Page 9: Connect The Electrical Components

    - Attach a 1/4 inch Quick Connect terminal to each DC power supply wire. NOTE: Do not use the chassis of the refrigerator or the vehicle frame as one of the conductors. Attach the DC power supply wires only to the battery and the power board [1] of the refrigerator.

  • Page 10: Connect The Propane Gas Components

    If you use compressed air for the test: - The pressure of the compressed air at the manual shut off valve of the refrigerator must not be more than 1/2 psig (14 inches Water Column). - If the pressure of the compressed air is more than 1/2 psig (14 inches Water Column), remove the gas supply line from the bulkhead fitting of the refrigerator before the test.

  • Page 11: Ignition And Start Up

    - The refrigerator is operating on AC electric power. - If the ON light and the GAS light [4] both come on, it means that: - 120 volt AC power is not available to the refrigerator. - The refrigerator is operating on propane gas. GAS Mode Operation: 1.

  • Page 12: Fault Codes

    Fault Codes a l i g i l a l i . e l g i l g i l a l i a l f g i l g i l a l f g " a t l g i l e l i a l f...
  • Page 13 Art00963...
  • Page 16 Art01727...

This manual is also suitable for:

N611N611fN810N811N811fN814f2 ... Show all

Table of Contents