Battery Installation (For Power Backup) - Panasonic HomeHawk KX-HNC855C Installation And Troubleshooting Manual

B
attery installation (for power backup)
You can insert 8 AA (LR6) batteries (not supplied) into the base to temporarily power the camera in the event of
a power failure�
Important:
• Use only alkaline batteries.
• Do NOT use manganese‚ Ni-Cd‚ Ni-MH‚ lithium‚ or lithium ion batteries.
• Confirm correct polarities (
• Disconnect the AC adaptor when inserting or replacing batteries.
• Batteries are only intended for short-term use.
1
Remove the base cover from
the base�
Note:
• The HomeHawk app notifies you when the battery power is low. In this case‚ remove and replace all of the
batteries with new ones�
HNC855C_ITG_(en_en)_0424_ver.040.pdf
‚ ).
2
Install the batteries in the
battery holder�
7
3
Attach the base cover to the
base�
2019/04/24
7
18:30:34