Touching The Ribbon At More Than One Point - Kurzweil ExpressionMate User Manual

Getting Started
Setups

Touching The Ribbon At More Than One Point

You can touch the Ribbon in two or more places at once.
However, there are a few things to realize when you do this:
1. When the Ribbon is in single-section mode, play only in one
of the three marked smaller sections at any time. In other
words, if you press down on the left end and slide up and
down the entire Ribbon with the other hand, the Ribbon
wonÕt respond correctly.
2. When there are three or more points of contact, any points in
the center will have no effect on the RibbonÕs output. For
instance, if you touch the Ribbon with the Þrst, second, third,
and fourth Þngers on one hand, only the Þrst and fourth
Þngers will have any effect.
18
Right
Wrong
Only Outside Points
of Contact Respond