Midi Merging; Mainmrgto And Aux Mrgto - Kurzweil ExpressionMate User Manual

Section 1
Section 3

MIDI Merging

If you look at the back of the ExpressionMate, youÕll see that it
has two MIDI interfaces: the Main interface and the Aux
interface. Each interface lets you send incoming data to either
MIDI Out port, along with any internal messages that you
generate with ExpressionMate Setups.
There are lots of uses for this; for instance, you might want to
send several sets of messages to an instrument with only one
MIDI In port. You could also send messages from different
instruments to just one track on a sequencer. There are other
possibilities too.
The ExpressionMate can merge all kinds of MIDI messages,
including Realtime messages and SysEx.

MainMrgTo and Aux MrgTo

The MainMrgTo and Aux MrgTo parameters tell the
ExpressionMate where to send messages that it receives at the
Main In port or Aux In port, respectively. You have three choices
for each:
Choosing Off disables merging for the input. The
•
ExpressionMate will respond to messages received at the
Section 2
0
RBN Dir = Right
Section 2
127
RBN Dir = Left
Figure 5-1. RBN Dir settings.
Global Parameter Set
Section 3
127
Section 1
0
Global Functions
79