For this type of installation, a gyroscope sensor is considered to be located
at home on the radar for radar tilt measurement, which in turn assists the
radar with angle correction.
5.3. Horizontal mounting mode
Given the current number of channels in the radar chip, the fall check
function in horizontal mounting mode is not considered for the time being.
6. Typical applications
A.
The product is suitable for small area scenarios such as bathrooms,
toilets and bedrooms.
B.
The product is suitable for overhead installation and tilt installation
mode.
C. The product is suitable for single/twin situations.
D. The product needs to be combined with the application scenario to
eliminate interfering movements.
Need help?
Do you have a question about the Fall Detection Module Pro and is the answer not in the manual?