Krups Espressia Automatic XP9000 Operating Instructions Manual page 15

Krups xp9000: user guide
Table of Contents

Advertisement

SERVICING FUNCTIONS
Never descale with vinegar or vinegar-based agents! Always use a Krups descaling powder (F054). When
descaling, cover your work surface below the machine because descaling agents, which contain acid,
can attack these surfaces. This applies especially to work surfaces made of stone, wood and marble.
Always descale without the water filter.
Descaling (approx. 30 min.)
4
1
DESCALING PROCEDURE
OK/+/-
Confirm by pressing
4
Calc
Add water and descaling powder as far as Calc mark in the water tank
Never interrupt the descaling program! Keep a number of receptacles handy. Keep descaling
powder out of the reach of children. Store with care. If your product is equipped with our Claris -
Aqua Filter System cartridge F088 - please remove this cartridge during the descaling operation.
5
Changing the water filter
CHANGE WATER FILTER
PRESS OK
Press
/
to select use
of water filter, confirm by
pressing
The Claris Aqua Filter System is effective for two months. If machine does not display
"Change filter" to begin with, then this must be done after every 2 months.
2
Empty drip tray and
container for used coffee
grounds, and put back
Follow instructions in display until the following appears ...
5
40 gr.
F 054
Automatic message appears when filter needs changing
PUT NEW
WATER FILTER
Select use of water filter by pressing
Empty water tank and
remove water filter
DESCALING FINISHED
APPLIANCE READY
í
If NO
í
If YES
OK
/
3
machine is ready
g o to pages 8/9,
steps 14-22
, confirm by pressing
15
.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents