Vision TECHMOUNT TM-ST Owner's Manual page 3

TM-ST TECHMOUNT OWNERS MANUAL
Congratulations on your choice of the
Vision TM-ST TECHMOUNT. In order to
obtain the best performance please be
sure to read this owner's manual and use
your product only in accordance with the
instructions. An electronic version of this
manual and further information can be
found on www.visionaudiovisual.com
WARNINGS
During installation take care to adhere to
workplace health and safety laws:
• Attach the bracket to a rated load-bearing
structure.
• Do not cut or drill any parts above head height. This should all be done using the correct
safety equipment at floor level.
• Avoid overstretching which might result in the ladder tipping over.
• SWL (safe working load): 0-750mm from wall: 7.5kg
THE ST8 WALL FIXTURES PROVIDED ARE ONLY FOR ATTACHMENT TO APPROPRIATE
SOLID WALLS – NOT HOLLOW WALLS. ALWAYS USE THE APPROPRIATE FIXTURES.
VISION DOES NOT ACCEPT LIABILITY FOR DETACHMENT FROM THE WALL EITHER BY
INSTALLATION WITH INADEQUATE FIXTURES OR OVERLOADING.
PACkAGING
Save all packing material. It is essential for shipping in the event the unit ever needs repair.
IF ORIGINAL PACkAGING IS NOT USED TO RETURN THE UNIT TO THE SERVICE CENTRE,
DAMAGE IN TRANSIT WILL NOT BE COVERED BY WARRANTY.
Vision is a partner in the TÜV SÜD product certification system. All applicable certification is provided
by TÜV. All products are designed and imported into the EU by 'Vision' who is wholly owned by
'Computer 2000 Distribution Ltd.', Registered in England Nr. 01691472 at Hampshire House, Wade Road,
Basingstoke, Hampshire RG24 8NE
WEE/AB0047SY
750-1550mm from wall: 5.0kg
1