Advertisement
3 WORK
3.4
8
Installing the 12-V battery
Warning
Risk of injury Battery acid and battery gases cause serious chemical burns.
–
Keep 12 V batteries out of the reach of children.
–
Wear suitable protective clothing and safety glasses.
–
Avoid contact with battery acid and battery gases.
–
Keep sparks or open flames away from the 12 V battery.
–
Only charge 12 V batteries in well-ventilated rooms.
–
Rinse the affected area immediately with plenty of water in the event of contact with the skin.
–
Rinse eyes with water for at least 15 minutes and consult a doctor immediately if battery acid and
battery gases get into the eyes.
Caution
Danger of accidents Electronic components and safety devices will be damaged if the 12-V battery is dis-
charged or missing.
If the 12-V battery is discharged or defective, malfunctions in the vehicle electronics can occur, espe-
cially when starting.
–
Never operate the vehicle with a discharged 12-V battery or without a 12-V battery.
S05222-11
S05221-11
Main work
–
1
Insert 12-V battery
into the battery compartment.
12-V battery (HJTZ14S-FPI)
–
Position the positive cable and mount and tighten the screw.
Guideline
Screw, battery termi-
nal
–
Position positive terminal cover
–
3
Position negative cable
Guideline
Screw, battery termi-
nal
–
Position the battery cover, mount screw
Guideline
Remaining screws,
chassis
–
5
Join plug-in connector
–
6
Position control unit
.
Finishing work
–
Mount the front rider's seat. (
–
Set time and date.
M6
4.5 Nm
(3.32 lbf ft)
2
.
and mount and tighten the screw.
M6
4.5 Nm
(3.32 lbf ft)
4
, and tighten.
M5
5 Nm (3.7 lbf ft)
.
p. 6)
Advertisement
