Advertisement
Quick Links
INSTALLATION, O
MAINTENANCE IN
BATTERY BACKUP LED XCH AND XCHCOM
READ AND FOLLOW ALL
WARNING: RISK OF ELECTRIC SHOCK – NEVER CONN
EQUIPMENT IS ENERGIZED.
WARNING: FAILURE TO FOLLOW THESE INSTRUCTION
SERIOUS INJURY OR SIGNIFICANT PROPERTY DAMAG
and instructions carefully before installing or maintaining thi
all installation and maintenance situations.
WARNING: RISK OF FIRE – Lamps are hot. Keep combus
manufacture's warnings, recommendations and restrictions
are correctly installed.
All service shall be performed by qualified service person
accordance with the applicable installation codes by a p
and the hazards involved.
unauthorized personnel.
g
ge rating of this equipment is specified on th
voltage.
AND DELIVER TO OWNE
IMPORTANT
nder cover (20°C - 50°C)
g
q p
SAVE THESE IN
OPERATION AND
STRUCTIONS FOR
SAFEGUARDS
SAFETY INSTRUCTIONS
NECT TO, DISCONNECT FROM, OR SERVICE WHILE
NS AND WARNINGS MAY RESULT IN DEATH,
GE – For your protection, read and follow these warnings
is equipment. These instructions do not attempt to cover
stible material away from hot parts. Observe lamp
on lamp operation and maintenance. Make sure lamps
nnel. This product must be installed and maintained in
erson familiar with the construction operation of the product
p
pplicable installation codes and ordinances.
or circuit breaker.
o
ing.
i
installation.
ts where it will not readily be subjected to tampering by
t
h
he manufacturer may cause an unsafe condition.
p
he product label. Do not connect equipment to any other
p
NSTRUCTIONS
ER AFTER INSTALLATION
q
p
y
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Evenlite XCH
Summary of Contents for Evenlite XCH
- Page 1 INSTALLATION, O OPERATION AND MAINTENANCE IN STRUCTIONS FOR BATTERY BACKUP LED XCH AND XCHCOM IMPORTANT SAFEGUARDS READ AND FOLLOW ALL SAFETY INSTRUCTIONS WARNING: RISK OF ELECTRIC SHOCK – NEVER CONN NECT TO, DISCONNECT FROM, OR SERVICE WHILE EQUIPMENT IS ENERGIZED.
- Page 2 SURFACE MOUNT INSTALLATIONS 1. Remove retainer screw from right side of the sign. Rem move side panel and mounting canopy, set aside. 2. Remove retainer screw from the front cover of the unit. Remove the front cover and set aside. 3.
- Page 3 OPERATION: EXIT – LED lamps will stay on in AC mode and remain on in the Emergency mode. To peform test, press test switch. LAMP HEADS – To test the equipment, depress the TEST T switch. The charge (LED) indicator will turn OFF and the emergency lights will illuminate.
Need help?
Do you have a question about the XCH and is the answer not in the manual?
Questions and answers