Figure 4: CAT5 PINOUT Tables Table 1: Front and Rear Panel Features of the VP-12NHD Table 2: Underside Features of the VP-12NHD Table 3: CAT5 PINOUT Table 4: Technical Specifications of the VP-12NHD 1:12 + 3 UXGA / CAT5 Distributor Contents...
GROUP 6: Accessories and Rack Adapters; GROUP 7: Scan Converters and Scalers; and GROUP 8: Cables and Connectors 2 Download up-to-date Kramer user manuals from the Internet at this URL: http://www.kramerelectronics.com 3 The complete list of Kramer cables is on our Web site at http://www.kramerelectronics.com Introduction...
Page 4
Getting Started KRAMER: SIMPLE CREATIVE TECHNOLOGY...
3.3 About the VP-12NHD The Kramer VP-12NHD is a high performance distributor for computer graphics signals, accepting one input, providing necessary buffering and isolation, and distributing the signal to its identical 12 outputs, as well as transmitting it over UTP cabling to 3 CAT5 outputs, each with a transmission range of more than 300 ft.
A video bandwidth that exceeds 300MHz, ensuring that it remains transparent even at high-resolution UXGA modes The power connect feature, see section 3.1 In addition, the VP-12NHD is mains fed and housed in a 19" enclosure. 3.4 Recommendations for Achieving the Best Performance Achieving the best performance means:...
Your VP-12NHD 1:12 + 3 UXGA / CAT5 Distributor Table 1: Front and Rear Panel Features of the VP-12NHD Feature POWER Switch INPUT HD15F Connector OUT HD15F Connectors OUT RJ-45 Connectors Power Connector with FUSE Table 2: Underside Features of the VP-12NHD...
Always mount the machine in the rack before you attach any cables or connect the machine to the power If you are using a Kramer rack adapter kit (for a machine that is not 19"), see the Rack Adapters user...
2. Connect the OUTPUT HD15F connectors to up to 12 acceptors (for example, Local Display 1 to Local Display 12). 3. Ensure that the ID BIT switch on the underside of the VP-12NHD is set to ON (by sliding it to the left). This would enable a notebook or laptop (if connected instead of a computer) to output a VGA signal to an external VGA monitor.
Using Your VP-12NHD 1:12 + 3 UXGA / CAT5 Distributor 6.1 Wiring the CAT5 LINE IN / LINE OUT RJ-45 Connectors Table 3 and Figure 4 define the UTP CAT5 PINOUT, using a straight pin to pin cable with RJ-45 connectors:...
3 The CAT5 output is measured at the TP-120 output, at maximum TP-120 gain of the TP-12N and the TP-120 setup 4 The CAT5 output is measured at the TP-120 output on the TP-12N and the TP-120 setup Technical Specifications of the VP-12NHD 1:12 + 3 UXGA / CAT5 Distributor...
Page 14
EXCLUSION OF DAMAGES The liability of Kramer for any effective products is limited to the repair or replacement of the product at our option. Kramer shall not be liable for: Damage to other property caused by defects in this product, damages based upon inconvenience, loss of use of the product, loss of time, commercial loss;...
Page 15
For the latest information on our products and a list of Kramer distributors, visit our Web site: www.kramerelectronics.com, where updates to this user manual may be found. We welcome your questions, comments and feedback. Safety Warning: Disconnect the unit from the power supply before opening/servicing.
Need help?
Do you have a question about the VP-12NHD and is the answer not in the manual?
Questions and answers