l in d ab | f o r a b e tt e r c l i ma t e
Architect
4.0 Product and system specification
8
4.1 Material data
Dry weight, [kg/m]
Water content, cooling, [l/m]
Water content, heating, [l/m]
Copper pipes, quality
Pressure class
4.2 Environmental declaration
Please follow the links below
•
Building product declaration
•
Declaration of conformity
•
Eurovent certificate
4.3 Pressure class
–
The waterborne products in Lindab, active chilled beams (battery products), passive
chilled beams (battery and strips products), façade units (battery) and radiant panels
(strips and panels) are produced according to pressure class PN 10 according to EN
1333: 2006.
–
This means the maximal working pressure for the products at a water temperature of
20°C must not exceed 10 bar.
Lindab reserves the right to make changes without prior notice
Service & Maintenance
2022-10-18
Architect Luna, Prisma, Circum
11
0.50
0.25
SS/EN 12449
PN10