Step3: Antenna Location - Panasonic WX-SA250P Operating Instructions Manual

Easy wireless design operation flow

STEP3: Antenna location

When you click the [Location analysis] button, the screen switches to the [Antenna location] screen. Click the [Recommended
antenna location] button in the [Antenna selection tool].
Antenna location procedure
1
Click the [Recommended antenna location] button.
The recommended antennas are placed in each area.
2
Add antennas.
Select an antenna from the [Antenna selection tool] and then click in the area in which to add it. The antenna is added in
the area.
3
Delete antennas.
Select an antenna to delete, right-click to display a menu, and select [Delete].
4 Important
Complete antenna location.
Click the [Antenna location complete] button. (Click the [Antenna location complete] button to check which area each area
is synchronized with and the synchronization signal level.)
● For details on antenna location, refer to "Antenna location" (page 28).
● For information about switching the display of the coverage area, refer to "About the coverage area" (page 31).
12
2
Antenna
selection tool
1
4