Easy wireless design operation flow
STEP3: Antenna placement
When you click the [Location analysis] button, the screen switches to the [Antenna location] screen. Click the [Recommended
antenna location] button in the [Antenna selection tool].
Antenna placement procedure
1
Click the [Recommended antenna location] button.
The recommended antennas are placed in each area.
2
Add antennas.
Select an antenna from the [Antenna selection tool] and then click in the area in which to add it. The antenna is added in
the area.
3
Delete antennas.
Select an antenna to delete, right-click to display a menu, and select [Delete].
4
Important
Complete antenna placement.
Click the [Antenna location complete] button. (When you click the [Antenna location complete] button, you can check which
area is synchronized with each area and the level of the synchronization signal.)
● For details on antenna placement, refer to "Antenna placement" (page 27).
12
2
1
4